P51-1000-A-N-D-5V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The P51-1000-A-N-D-5V pressure sensor is designed to measure the pressure of any gas, liquid or vapor. It is used to make the changes in pressure level in various environments and applications. The pressure level can be determined through the electrical signals generated by this sensor. The typical working pressure range of the P51-1000-A-N-D-5V pressure sensor is 0-1000 PSI. This pressure sensor has a maximum range of 2000 PSI.The P51-1000-A-N-D-5V pressure sensor can be used in a wide range of applications, such as automotive, mining, petrochemical, aerospace, oil and gas, and marine applications. It can monitor pressure levels in tanks, pipelines, valves, and vessels. The sensor can also be used to monitor the pressure of gaseous and liquid media in pipelines and vessels. It can be used to detect changes in pressure level for various purposes, such as for the safety of personnel and vessels, or to improve performance. The P51-1000-A-N-D-5V pressure sensor is designed with a consumer-friendly interface. It is easy to set up, use, and maintain. The interface includes a display that shows the pressure reading, a control dial to adjust the pressure setting, and an alarm port to indicate any changes in pressure level. The alarm port can be connected to an audible system or a computer system. The display shows the current, peak, and minimum levels of pressure.The P51-1000-A-N-D-5V pressure sensor is also designed to provide accurate and reliable measurements. It is capable of withstanding extreme temperatures, vibrations, and shocks. It has a high accuracy of ± 2.5 %FS. It is designed to withstand the most extreme environmental conditions. It is resistant to corrosion and is suitable for use in humid or acidic environments. The P51-1000-A-N-D-5V pressure sensor is a transducer that converts a pressure input into an electrical signal. The principle behind this transducer is the Wheatstone bridge principle. The Wheatstone bridge is an electrical circuit that consists of four resistors connected in series. Two of the resistors are constant and two of them vary according to the pressure of the environment. When the pressure of the environment increases, one of the resistors increases while the other decreases in resistivity. This causes the Wheatstone bridge to be out of balance. The imbalance of the Wheatstone bridge causes a voltage to be generated by the bridge. This electrical voltage is sent to the transducer, which in turn converts it into an electrical signal that can be measured. The P51-1000-A-N-D-5V pressure sensor is an important tool for pressure sensing in various applications. It provides accurate and reliable readings and can be used to monitor changes in pressure levels in different environments. It can be used for safety purposes to protect personnel in hazardous areas and to improve the performance of systems in various applications.

The specific data is subject to PDF, and the above content is for reference