P51-1000-A-T-M12-4.5V-000-000

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Absolute
Operating Pressure:	1000 PSI (6894.76 kPa)
Output Type:	Analog Voltage
Output:	0.5 V ~ 4.5 V
Accuracy:	±0.5%
Voltage - Supply:	5V
Port Size:	Female - 7/16" (11.11mm) UNF
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	M12, 4 Pin
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers Overview

Pressure sensors, transducers, and transmitters are used to measure the pressure of liquids and gases, and in some applications, also solids. Pressure is, however, distinguished from level, as it measures the force applied by a fluid per unit area, while level merely records the difference in height between two points in a container. Pressure sensors, transducers, and transmitters function by converting a measured pressure into a related and easily readable output signal.

P51-1000-A-T-M12-4.5V-000-000 Application Field and Working Principle

The P51-1000-A-T-M12-4.5V-000-000 series of pressure sensors are part of Crouzet Pressure Sensors & Transducers product line, suited for applications in industrial and hazardous environments. They feature a robust sealed M12 threaded housing, that stands up to vibration and extreme conditions.The P51-1000-A-T-M12-4.5V-000-000 is a pressure sensor providing an analogue output, allowing for readout device to measure the voltage and convert it to the actual pressure being measured. The output is 4.5V, and the pressure range is 0 – 1000mBars. The sensor consists of a special diaphragm and strain gauge with a Wheatstone bridge network, which senses the stress acting on the diaphragm caused by pressure changes. The sensed stress is converted to an electrical signal, with the magnitude of the signal proportional to the change in pressure. This proportional signal is then converted by an amplifier into the 4.5V output voltage.

Conclusion

Pressure sensors, transducers, and transmitters are used to measure the pressure of liquids and gases, and in some applications, also solids. The P51-1000-A-T-M12-4.5V-000-000 series of pressure sensors by Crouzet are designed to withstand high vibration and extreme conditions. They feature a robust sealed M12 threaded housing, and the output is 4.5V, with a pressure range of 0 - 1000mBars. The working principle of the sensor is based on converting the pressure change into an electrical signal, with the magnitude of the signal being proportional to the pressure change.

The specific data is subject to PDF, and the above content is for reference