P51-1000-S-B-I12-4.5V-000-000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors and transducers are integral components for many industries due to their broad application range and measurable precision. The P51-1000-S-B-I12-4.5V-000-000 pressure sensor/transducer is no exception. This model can be used in a variety of industries and applications, and provides reliable and accurate pressure readings when integrated into any number of systems.

Overview of the P51-1000-S-B-I12-4.5V-000-000 Pressure Sensor/Transducer

The P51-1000-S-B-I12-4.5V-000-000 pressure sensor/transducer is designed and produced by Omron, a name synonymous with high-quality and precision electronics and components. This unit is a single-point pressure transducer and a two-wire, 4.5V DC output device.

The range for the P51-1000-S-B-I12-4.5V-000-000 model is from 0 to -1,000 kPa. It has an accuracy of ±0.1% FSO, a proof pressure of 3,000 kPa, and a response time of 25 ms. The operating temperature range is between -40°C and 105°C, and the device is protected by a stainless steel diaphragm and housing. No additional external components are required for use of the P51-1000-S-B-I12-4.5V-000-000.

This device is sold pre-calibrated, and is ready to use out of the box. The calibration of the pressure transducer is pressure compensated and adjusted to the rated span. The calibration covers off-zero, zero balance, linearity, hysteresis, and repeatability. As with all pressure sensing/transducing devices utilizing such high-sensitivity components, periodic recalibration may be required to ensure accurate readings.

Application Fields and Working Principle

The P51-1000-S-B-I12-4.5V-000-000 pressure transducer is an ideal choice for applications such as oil and gas exploration and drilling, automotive brake systems, HVAC systems, medical equipment, and laboratory and industrial test and measurement. Its small size, robust stainless steel housing and diaphragm, and broad pressure range make it an ideal choice for various industries.

The working principle of this pressure transducer is relatively simple. When pressure is applied to the device, the stainless steel diaphragm and housing deflects. This deflection is then measured using capacitance. A reference voltage is then used to calculate and measure the pressure, and the output signal of the pressure transducer is proportional to this calculation and measurement. This signal is usually 4.5V, which is then amplified at the receiving end of the system and used to control the operations of the device it is connected to.

Conclusion

The P51-1000-S-B-I12-4.5V-000-000 pressure transducer is a reliable and accurate component for a wide range of applications and industries. It is an efficient device that requires minimal calibration and can provide accurate readings for a variety of systems. This transducer is backed by the name of Omron, a leader in the electronic and component industry, so you can rest assured your readings are accurate and reliable.

The specific data is subject to PDF, and the above content is for reference