P51-15-A-H-D-4.5V-000-000

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Absolute
Operating Pressure:	15 PSI (103.42 kPa)
Output Type:	Analog Voltage
Output:	0.5 V ~ 4.5 V
Accuracy:	±1%
Voltage - Supply:	5V
Port Size:	Male - M12 x 1.5
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	Deutsch, 3 Pin
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Pressure Sensors and Transducers

Pressure sensors and transducers are devices that measure and manipulate pressure. They are used to measure and convert pressure from one form to another. True pressure sensors measure atmospheric, liquid or gas pressure, while transducers, typically, measure displacement, force, or torque and convert the input to an electrical signal. Depending on the application, both types can be used in a variety of industries ranging from automotive to aerospace.

P51-15-A-H-D-4.5V-000-000 Application Field and Working Principle

The P51-15-A-H-D-4.5V-000-000 is a pressure sensing device, which is designed to measure and convert the pressure in both liquid and gas systems. It is an example of a true pressure sensor and is specifically designed and manufactured for both low- and high-pressure applications.The actual working principle begins with the transducer diaphragm being exposed to the pressure of the medium. This pressure changes the position of the diaphragm resulting in a change in capacitance. This change in capacitance is then converted to a voltage, which is output from the device. This output voltage is proportional to the input pressure.

Design Considerations

When using a pressure transducer, there are a number of design considerations that must be taken into account. These include accuracy, range, linearity, electrical characteristics, size, and environmental conditions. These design considerations are determined by the specific requirements of the application.

Accuracy

One of the most important design considerations is accuracy. This is the degree to which a pressure transducer\'s output signal corresponds to the measured pressure. This accuracy is typically specified in percentage of full-scale error or absolute pressure +/- a certain percentage. It is important to note that accuracy is not always the same for all pressure ranges.

Range

The range of the pressure transducer is also important and is typically specified by the manufacturer. This range is the maximum rated pressure that the device can accurately measure. If the pressure exceeds this range, the output signal will no longer be accurate and may not be accurate at all.

Linearity

The linearity of the pressure transducer is also important and must be taken into account when selecting the device for a specific application. This is the degree to which the output response of the device is proportional to the input pressure. This linearity is typically specified by the manufacturer in terms of the percentage of full-scale deviation at the upper and lower limits of the range.

Electrical Characteristics

The electrical characteristics of the pressure transducer are also important and must be taken into account. These electrical characteristics are typically specified in terms of output signal range, input voltage requirement, and output impedance. It is important to note that these characteristics are typically dependent on the application and must be taken into account.

Size and Enclosure

The size of the pressure transducer is also important and must be taken into account. The size of the device will affect the installation and mounting of the device. Additionally, the size affects the accuracy of the device as the smaller the sensor, the less precise the output signal due to the greater mechanical movement required to produce an output signal.The enclosure of the unit is also important and affects the durability and response time of the device. The unit must be able to withstand the environment in which it is being used and the material it is made from will affect the response time of the device.

Conclusion

In summary, the P51-15-A-H-D-4.5V-000-000 is a pressure sensor designed to measure and convert pressure in both liquid and gas systems. All design considerations including accuracy, range, electrical characteristics, size, and environmental conditions must be taken into account when selecting the pressure transducer for a specific application. With the proper selection of a pressure transducer, the device can provide accurate and reliable data for the application.

The specific data is subject to PDF, and the above content is for reference