P51-15-S-U-I12-20MA-000-000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors and Transducers

The P51-15-S-U-I12-20MA-000-000 is a pressure sensor used to measure pressures from a variety of sources. It is used in connection with pressure transducers, which are variable input-output devices used to measure pressures, among other forces. While the exact application and working principles vary depending on the type and setting, a general overview is provided below.

Application

The P51-15-S-U-I12-20MA-000-000 is suitable for use in industrial and medical applications. In industrial applications, pressure sensors and transducers are used to measure the pressure of process fluids such as gas and liquid. They can also be used to monitor the operating conditions of process pressure equipment such as valves, pumps, and boilers. In medical applications, pressure sensors and transducers are used to monitor and measure pressure and fluid flow inside the body.

Working Principle

When a pressure change occurs, in either gases or liquids, the pressure transducer converts the pressure into an electrical signal. To do this, the transducer has an internal mechanical arrangement. This arrangement senses the pressure and applies it to a membrane or diaphragm that deflects, changing the electrical capacitance of two electrodes embedded in the membrane. This capacitance change creates an output voltage. This voltage is proportional to the applied pressure and is sent to an instrumentation amplifier to be conditioned for further processing.

The output signal is then passed through an analog-to-digital (A/D) converter and conditioned further. The A/D converter converts the data to digital signals, which can then be processed and further analyzed. The signal is then sent to the systems controller, which processes the data to perform the intended function.

Installation

Installation of the P51-15-S-U-I12-20MA-000-000 should be done by an experienced professional. It is important to ensure that the unit is mounted in the correct position to obtain the best possible accuracy and to prevent overloading of the transducer. The pressure connection on the transducer should also be checked for any possibility of leaking or obstruction. Proper cabling and wiring must also be done to ensure proper functioning.

Calibration

Calibration of the pressure transducer is required for its proper operation. This is usually done with a standard pressure device, like a cell, or a deadweight tester, used to generate the pressure reference source. This reference source is then used to calibrate the transducer at different pressure levels. A chart recorder is then used to record the values of pressure and compare it with the values from the standard device.

Conclusion

The P51-15-S-U-I12-20MA-000-000 is a pressure sensor and transducer suitable for various industrial and medical applications. It works by changing the capacitance of two electrodes embedded in a membrane or diaphragm, which then produces an output voltage that is proportional to the applied pressure. Proper installation and calibration is required for it to operate correctly. With the right application and working environment, this device is an ideal tool for measuring pressure.

The specific data is subject to PDF, and the above content is for reference