P51-15-S-UC-P-20MA-000-000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors, transducers, and P51-15-S-UC-P-20MA-000-000 are all related topics. Pressure sensors, also known as pressure transducers or pressure transmitters, are devices that measure and monitor the pressure of liquids or gases. Pressure transducers refer to devices which convert a pressure input into a proportional electrical output, such as a pressure transducer. The P51-15-S-UC-P-20MA-000-000 is a certain type of pressure transducer.

The P51-15-S-UC-P-20MA-000-000 is a pressure transducer with a range of 0-20 millibar and a 0.5-4.5V electrical output. It has a pressure port which is compatible with connection to a 1/2 "-14NPTF fitting, and the electrical output connector is a 4-pin female MIL-s-5015 type. This transducer is designed for measuring liquid and gaseous pressure in industrial applications, such as process control or monitoring. It is also suitable for hazardous environments, as it is certified according to UL. The operating temperature range is -40 to +70 °C.)

In order to understand how the P51-15-S-UC-P-20MA-000-000 works, one has to understand the basic principles of how a pressure transducer operates. A pressure transducer operates by converting a mechanical pressure input from the fluid or gas being measured into an electrical output, usually a voltage. The transducer consists of a pressure-sensitive diaphragm that separates two cavities. The pressure being sensed is applied to one side of the diaphragm, causing it to bend or otherwise deform. This deformation is picked up by a sensing element, which could be a strain gauge, a capacitive plate, or an optical sensor. When the pressure applied to the diaphragm changes, the electrical output of the transducer also changes. The change in the electrical output can then be used to calculate the pressure.

The P51-15-S-UC-P-20MA-000-000 transducer makes use of a strain gauge as its sensing element. A strain gauge is a component which changes its resistance in response to a mechanical strain. In this case, the strain is applied to the diaphragm by the pressure of the fluid or gas being measured. The diaphragm and the strain gauge are connected to a Wheatstone bridge circuit. The Wheatstone bridge is an electrical circuit which is balanced when the two opposite sides of it have equal resistance. As the applied pressure changes, the resistance of the strain gauge changes, and this in turn changes the balance of the Wheatstone bridge. The bridge is connected to a power source, and the output voltage of this circuit is proportional to the amount of strain applied by the pressure.

The P51-15-S-UC-P-20MA-000-000 pressure transducer is well suited for use in a variety of industrial applications, especially where the pressure being monitored needs to be accurately measured or tracked over time. Its simple but effective design makes it reliable and durable, and it is also certified for use in hazardous environments. It is a valuable tool for anyone monitor the pressure of liquid or gaseous media.

The specific data is subject to PDF, and the above content is for reference