P51-200-A-S-M12-5V-000-000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors and transducers are a type of sensor that measures the pressure of a gas or liquid relative to a specific reference pressure. These devices can be configured to measure absolute, differential, and gauge pressures, and also pressure differences of varying ranges. The P51-200-A-S-M12-5V-000-000 is a type of pressure sensor/transducer that measures pressure within a specific range.

The P51-200-A-S-M12-5V-000-000 pressure sensors/transducers are used mainly in laboratory, research and commercial applications. This type of sensor is usually used to measure the pressure of gases, liquids, and solids that are either flowing or stationary. Some of the most common applications for this type of sensor include pressure gauges, pressure switches, and pressure transducers in industrial, automotive, medical, and process control systems.

The P51-200-A-S-M12-5V-000-000 pressure sensors/transducers have a wide range of features that allow them to be used in a variety of different applications. The operating range of this type of sensor/transducer is between -200 kPa and +500 kPa. The sensor also features a low power consumption of 1 mW, and a quick response time of 12-24 ms. Additionally, this type of sensor has a small size and low weight, making it easy to install in tight spaces.

The working principle of the P51-200-A-S-M12-5V-000-000 pressure sensor/transducer is based on a piezoelectric effect. This effect occurs when a mechanical strain is applied to a material, which then causes an electrical charge to appear across its surfaces. The amount of charge produced, or the sensitivity, depends on the magnitude of the applied strain. This type of sensor is designed to measure strain exerted on its diaphragm by the pressure of a gas or liquid.

The P51-200-A-S-M12-5V-000-000 pressure sensor/transducer produces an output voltage that is proportional to the pressure applied. This voltage is then fed to a circuit, which amplifies it before sending it to a voltage meter. The sensitivity of the sensor is determined by the sensitivity of the circuit used to amplify the sensor\'s output voltage. This type of sensor is also used in pressure switches, which are used to switch on and off a device when a certain amount of pressure is detected.

In conclusion, the P51-200-A-S-M12-5V-000-000 pressure sensor/transducer is a type of sensor that is used mainly in laboratory, research and commercial applications. This type of sensor is used to measure the pressure of gases, liquids, and solids that are either flowing or stationary. The working principle of this type of sensor is based on a piezoelectric effect, which produces an output voltage that is proportional to the pressure applied. This output voltage is amplified and then sent to a voltage meter in order to measure the pressure. This type of sensor is also used in pressure switches, which are used to switch on and off devices when a certain amount of pressure is detected.

The specific data is subject to PDF, and the above content is for reference