P51-2000-S-P-I12-20MA-000-000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors, transducers and other devices are utilized in a wide range of applications, such as pressure measurement and control, fluid flow, and gas and liquid flow control. The P51-2000-S-P-I12-20MA-000-000 is a type of pressure sensor that offers reliable measurements in a wide range of industrial and commercial applications. In this article, we will look at the application fields and working principle of the P51-2000-S-P-I12-20MA-000-000 pressure sensor.

The P51-2000-S-P-I12-20MA-000-000 is a low-current, industrial-grade pressure sensor with a pressure range of 0 to 2000psi. It is designed to be used in applications where accuracy and reliability is of utmost concern. The pressure sensor has a mechanical and electrical design that is optimized for its application. The device utilizes a pressure port, an analog input, an output signal and an accuracy of ±2.5%.

The input to the P51-2000-S-P-I12-20MA-000-000 is a 4-20mA signal that is fed through the pressure port. The pressure port acts as a conduit for the pressure to be measured. The pressure is applied to the pressure port and then transferred to a sensing diaphragm housed inside the device. The diaphragm is connected to a sensing mechanism that converts the pressure into an electrical signal.

The output signal from the pressure sensor is proportional to the pressure being measured. This signal is then sent to an electronic signal processor that is used to convert the signal into a digitized form. The output signal is then available for further processing or for display. The output signal can also be used to control a pressure relief valve or to activate an alarm if the pressure exceeds the preset limits.

The working principle of the P51-2000-S-P-I12-20MA-000-000 is based on the Wheatstone bridge circuit. This circuit consists of four resistors in a Wheatstone configuration, with one resistor connected to the two sensing diaphragms and the other three connected to the analog input. When pressure is applied to one of the diaphragms, the voltage across the other three resistors changes, causing a change in the output signal.

The P51-2000-S-P-I12-20MA-000-000 is used in a wide range of applications, such as pressure measurement, fluid flow, gas and liquid flow control. It is also used in industrial automation and control, medical and military instrumentation, fuel management systems, and environmental monitoring. The device has a wide range of operating temperature and pressure and a long operating life.

In conclusion, the P51-2000-S-P-I12-20MA-000-000 is an industrial-grade pressure sensor that offers reliable measurements in a wide range of applications. It utilizes a mechanical and electrical design that is optimized for its use in pressure measurement and control, fluid flow, gas and liquid flow control, and other industrial applications. The device is based on the Wheatstone bridge circuit and is capable of providing accurate analog signals for further processing or display.

The specific data is subject to PDF, and the above content is for reference