P51-300-A-S-M12-20MA-000-000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors, transducers, and related devices are used in a wide variety of applications and industries. P51-300-A-S-M12-20MA-000-000 is a pressure transducer, a device that measures and converts pressure into electrical signals used for further processing or control of equipment.

When used in industrial settings, pressure transducers are typically installed in a line with the process medium (for example, water, oil, steam) so that the pressure of the medium can be monitored and controlled. In this V configuration, pressure is measured with respect to the atmospheric pressure as the reference, as indicated by the suffix “A” in the product model.

The P51-300-A-S-M12-20MA-000-000 pressure transducer consists of a sealed stainless steel sensing element insulated from its housing. The sensing element is connected to a strain gauge, which produces a signal when it is stretched or compressed by the applied pressure. The output signal is proportional to the applied pressure. When the pressure changes, the strain gauge produces an electrical signal, which is converted by the transducer into an electronic signal that can be used for monitoring or controlling the process.

The transducer’s output is often in the form of a current, as specified by the suffix “MA” in the product model—in this case, 4-20mA. This means that when the pressure is measured to be, for instance, 10psi, the output will be 12mA, a current signal. The range of the output signal (4-20mA) depends on the pressure range (Psi), which in this case is 0-30Psi.

In most pressure transducers, the output signal is processed by an integrated circuit before being sent to the analog input of the controller. This is done to ensure accuracy of the measurement and to provide some degree of noise rejection. Once the controller receives the signal, it can be used to trigger a control process, such as switching on/off a valve, for example.

Pressure transducers are also used in automotive applications, for example, as an electronic pressure sensor in an airbag system or an engine speed sensor in a car’s fuel injection system. They are also used for pressure measurements in industrial processes, such as welding, injection molding, and pneumatic or hydraulic systems.

The P51-300-A-S-M12-20MA-000-000 pressure transducer is designed for robust applications with a pressure range of 0-30Psi and a 4-20mA output signal. Its stainless steel construction and integrated electronics make it ideally suited for many industrial and automotive uses.

The specific data is subject to PDF, and the above content is for reference