| Allicdata Part #: | P51-300-A-T-M12-5V-000-000-ND |
| Manufacturer Part#: |
P51-300-A-T-M12-5V-000-000 |
| Price: | $ 150.30 |
| Product Category: | Sensors, Transducers |
| Manufacturer: | SSI Technologies Inc |
| Short Description: | SENS 300PSI 7/16-20-2B 1-5V |
| More Detail: | Pressure Sensor 300 PSI (2068.43 kPa) Absolute Fem... |
| DataSheet: |  P51-300-A-T-M12-5V-000-000 Datasheet/PDF |
| Quantity: | 1000 |
| 5 +: | $ 136.63800 |
| Series: | MediaSensor™ |
| Part Status: | Active |
| Pressure Type: | Absolute |
| Operating Pressure: | 300 PSI (2068.43 kPa) |
| Output Type: | Analog Voltage |
| Output: | 1 V ~ 5 V |
| Accuracy: | ±0.5% |
| Voltage - Supply: | 8 V ~ 30 V |
| Port Size: | Female - 7/16" (11.11mm) UNF |
| Port Style: | Threaded |
| Features: | Amplified Output, Temperature Compensated |
| Termination Style: | M12, 4 Pin |
| Maximum Pressure: | -- |
| Operating Temperature: | -40°C ~ 105°C |
| Package / Case: | Cylinder |
| Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Pressure Sensors & Transducers
P51-300-A-T-M12-5V-000-000 is a pressure transducer developed by Techno-Indonesia. It is a high-precision pressure transducer for measuring gas pressure in industrial and commercial applications. Pressure transducers are often used in critical process control and automation applications, such as in power plants, chemical plants and oil and gas facilities.
Application Fields
P51-300-A-T-M12-5V-000-000 pressure transducers are suitable for monitoring and controlling the pressure of air, water, non-corrosive gases and any other non-corrosive liquids. It can be used for measuring pressure in oil and gas, chemicals, petroleum, petrochemicals and power industries, and can be used for compressor applications, cooling systems, fire protection systems, HVAC equipment, and other pressure measurement.
Working Principle
Pressure transducers typically measure pressure through the application of a piezoelectric crystal or thin film strain gauge. Piezoelectric crystals can convert force or pressure into an electrical charge, and this charge is measured and converted into a digital or analog output. The P51-300-A-T-M12-5V-000-000 pressure transducer uses a stainless steel diaphragm attached to a Wheatstone bridge strain gauge sensor. The diaphragm is deformed as a result of applied pressure, which changes the electrical resistance of the strain gauge. This change in electrical resistance is detected by a Wheatstone bridge circuit, which outputs an electrical signal that is proportional to the applied pressure. This signal can then be converted into a digital or analog output, depending on the application.
Conclusion
P51-300-A-T-M12-5V-000-000 pressure transducers are ideal for measuring pressure in industrial and commercial applications due to its accuracy, reliability, and durability. The transducers can measure the pressure of air, water, non-corrosive gases and any other non-corrosive liquids, and are suitable for use in oil and gas, chemicals, petroleum, petrochemicals and power industries. The transducers work on the principle of a strain gauge and a Wheatstone bridge circuit, which measures the diaphragm\'s electrical resistance and outputs an electrical signal proportional to the applied pressure.
The specific data is subject to PDF, and the above content is for reference
SST PRESSURE TRANSDUCERPressure Sensor
PRSSR TRNS 0-100BR 4-20MA DINPressure Se...
BRD MNT PRESSURE SENSORSPressure Sensor ...
BRD MNT PRESSURE SENSORSPressure Sensor ...
HEAVY DUTY PRESSURE TRANSDUCERPressure S...
BRD MNT PRESSURE SENSORSPressure Sensor ...