P51-300-A-T-P-20MA-000-000

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Absolute
Operating Pressure:	300 PSI (2068.43 kPa)
Output Type:	Analog Current
Output:	4 mA ~ 20 mA
Accuracy:	±0.5%
Voltage - Supply:	8 V ~ 30 V
Port Size:	Female - 7/16" (11.11mm) UNF
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	Packard, 3 Pin
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Introduction

Pressure sensors, transducers, and other devices that measure a pressure factor are widely used. This article focuses on the application field and working principle of the P51-300-A-T-P-20MA-000-000 pressure transducer.

Overview

The P51-300-A-T-P-20MA-000-000 pressure transducer is a type of piezoresistive (PZR) transducer that is capable of measuring pressures up to 20MPa (20000 kPa). This transducer provides an output in the form of a voltage that can range from 0-5V or 4-20mA. It is also compatible with several different pressure measuring systems, such as absolute, gauge, and differential pressures. The P51-300-A-T-P-20MA-000-000 is a miniature device with a dimension of 4.9" × 3.7" × 1.6" (124.46mm × 94.16mm × 40.64mm). This pressure transducer has a dielectric strength of 500V and an insulation resistance of ≥20MΩ. The maximum operating temperature of this transducer is -40°C ~ +125°C and it can be used in a wide range of environments and applications.

Application Field

The P51-300-A-T-P-20MA-000-000 pressure transducer is a versatile, robust, and reliable device that is used in many applications. This transducer is often used in industrial and medical applications due to its high accuracy and reliability. It is commonly used for pressure measurement in hydraulic systems, process control systems, and medical equipment.In industrial applications, the P51-300-A-T-P-20MA-000-000 is often used for pressure measurement in hydraulic systems. It is used to measure the pressure of liquids and gases in industrial processes. The transducer is also often used for process control and monitoring in industrial applications.The P51-300-A-T-P-20MA-000-000 is also widely used in medical applications. It is commonly used to measure the pressure of blood, urine, cerebrospinal fluid, or veterinary fluids. This transducer is also used for measuring pressure in medical respirators and ventilators.

Working Principle

The P51-300-A-T-P-20MA-000-000 pressure transducer converts a pressure signal into an electrical signal. This type of transducer uses a piezoresistive (PZR) Wheatstone bridge to measure pressure. The Wheatstone bridge is composed of four resistors that form a voltage divider network. The application of pressure to the bridge causes the resistances of the resistors to change, altering the voltage output of the bridge.The output voltage of the bridge is amplified by an on-board amplifier and then converted into either a 0-5V or 4-20mA signal. This signal is then sent to a data logging device or other pressure measuring system. The P51-300-A-T-P-20MA-000-000 is capable of measuring pressures up to 20MPa (20000 kPa) with an accuracy of 0.2% and a repeatability of 0.1%.

Conclusion

The P51-300-A-T-P-20MA-000-000 is a piezoresistive (PZR) transducer that is used to measure pressure. This transducer is designed for use in a wide range of applications and environments. The P51-300-A-T-P-20MA-000-000 is used in industrial and medical applications due to its high accuracy and reliability. It is capable of measuring pressures up to 20MPa (20000 kPa) with an accuracy of 0.2% and a repeatability of 0.1%. The P51-300-A-T-P-20MA-000-000 pressure transducer uses a Wheatstone bridge to convert a pressure signal into an electrical signal.

The specific data is subject to PDF, and the above content is for reference