P51-300-S-AA-D-4.5V-000-000

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Sealed Gauge
Operating Pressure:	300 PSI (2068.43 kPa)
Output Type:	Analog Voltage
Output:	0.5 V ~ 4.5 V
Accuracy:	±0.5%
Voltage - Supply:	5V
Port Size:	Male - 7/16" (11.11mm) UNF
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	Deutsch, 3 Pin
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The P51-300-S-AA-D-4.5V-000-000 is a type of pressure sensor, or a transducer, which is designed to sense and measure the level of pressure of either liquid or gas, and then convert the pressure information into an electrical signal. It is composed of three basic parts: the sensing element, the pressure transducer, and the output device.The sensing element is made of metal and its surface is sensitive to pressure. Its design varies depending on the type of pressure sensor but in this type of pressure sensors, it is composed of a diaphragm made from a thin piece of stainless steel which has a hole in the center. This hole is connected to a small chamber with a pressure-linked valve and a porting conduit. When the pressure of either liquid or gas alters, the force exerted on the diaphragm causes it to bend. This bending movement is then transmitted to the pressure-linked valve which responds to the change in pressure level and opens and closes accordingly. When the valve is open, the pressure from the liquid or gas flows into the porting conduit.The pressure transducer is the device that converts the pressure information into an electrical signal. This is done by utilizing an amplifier and a sensor which together create an output signal that is sent to the output pressure sensing device. The output pressure sensing device is designed to convert the pressure from the transducer into a voltage or current signal that can be read and analyzed.The output device is designed to display the pressure information in an easily readable manner. It can be a digital readout display, an analog meter, or even a chart recorder. The output device is usually connected to a control system which is designed to act upon the pressure levels it is receiving.The P51-300-S-AA-D-4.5V-000-000 pressure sensor is used in a wide range of applications, such as automotive and medical equipment. It is mostly used for monitoring pressure levels in pipework, tanks and other pressure filled systems. The pressure sensor is used to measure pressure differences in a range of temperatures, and then converts it into an electrical signal. The pressure measured in the system is proportional to the displacement of the sensing element when pressure is applied or removed. The displacement of the sensing element results in a change in capacitance, which is then detected by the pressure transducer. The output from the pressure transducer is then passed through an amplifier and fed to an output device. The working principle of the P51-300-S-AA-D-4.5V-000-000 pressure sensor is determined by the way it converts pressure into an electrical signal. It utilizes the diaphragm which is sensitive to pressure, and is connected to a porting conduit. When pressure is altered, the force exerted on the diaphragm is then transmitted to the pressure-linked valve, which then opens and closes accordingly. The pressure is then measured by the pressure transducer and converted to an electrical signal. Finally, the output is sent to the output device, which will display the pressure level in either a digital readout, an analog meter, or a chart recorder.

The specific data is subject to PDF, and the above content is for reference