P51-5-G-UC-I36-20MA-000-000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors and transducers are devices that measure pressure and convert this measure into an electrical signal. The P51-5-G-UC-I36-20MA-000-000 is a type of pressure sensor and transducer used in industrial and commercial applications.

The pressure sensors and transducers of this model measure pressure in relation to its ambient pressure range. The unit outputs its readings in kPa, mbar or mmHg. This model is suitable for measuring gauge pressure, absolute pressure, differential pressure, and process pressure. The range of use of this model is 0 to 10,000 kPa (roughly 0.1 MPa).

The measurement of pressure is carried out by the use of strain gages. A Wheatstone bridge is used with strain gages and a micro-controller. The strain gages are set to the measured pressure and then the micro-controller measures the resistance. This resistance then provides an electrical signal that is then converted to a pressure reading.

The Wheatstone bridge is set up so that as the pressure increases the resistance in one arm of the bridge increases while the resistance in the other arm decreases. This causes the output voltage to increase or decrease as a result of the changed ratio of resistance. The output voltage is then used to provide a numerical readout of the measured pressure.

The P51-5-G-UC-I36-20MA-000-000 pressure sensors and transducers are suitable for use in air, oil, and gas applications. The sensor is designed to be resistant to shock and vibration and can be used in industrial or commercial environments. The unit also has good accuracy and a wide temperature range (-20°C to +120°C).

The P51-5-G-UC-I36-20MA-000-000 sensors and transducers require a source of power for operation. They are typically powered by an 8 to 12 VDC power supply or a 24 VAC power supply. The units also include built-in filtering to minimize electrical noise from external sources.

The P51-5-G-UC-I36-20MA-000-000 sensors and transducers can be used in a variety of applications. They are used in industry to measure pressure for process control and monitoring systems. They can also be used in laboratory applications to measure pressure in scientific experiments. The unit is also used in engineering and automotive applications such as a fuel pressure sensor in an internal combustion engine.

In summary, the P51-5-G-UC-I36-20MA-000-000 pressure sensors and transducers are used to measure pressure changes in gases, liquids, or solids. The readings are converted to an electrical signal through strain gages in a Wheatstone bridge and a micro-controller. The sensor is suitable for measuring gauge, absolute, differential, and process pressure. The unit is suitable for use in industrial and commercial applications and is resistant to shock and vibration and offers good accuracy and a wide temperature range. It requires a power source of 8 to 24 VDC or VAC.

The specific data is subject to PDF, and the above content is for reference