P51-50-G-G-M12-20MA-000-000

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Vented Gauge
Operating Pressure:	50 PSI (344.74 kPa)
Output Type:	Analog Current
Output:	4 mA ~ 20 mA
Accuracy:	±1%
Voltage - Supply:	8 V ~ 30 V
Port Size:	Male - 1/8" (3.18mm) NPT
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	M12, 4 Pin
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers.

Pressure sensors and transducers are ubiquitous in industries and in everyday life. They are used to measure and monitor physical forces such as pressure, temperature, flow rate, shock, and humidity. This article will focus on the P51-50-G-G-M12-20MA-000-000 pressure sensor and transducer, its application field and working principle. The P51-50-G-G-M12-20MA-000-000 is an absolute pressure sensor designed for use in commercial and industrial applications. The P51-50-G-G-M12-20MA-000-000 measuring range is 0.5…50 mbar and is suitable for air, gases and gaseous mixtures. The installation of the sensor requires no complicated wiring. Its pressure measurement accuracy is 0.25%. The maximum pressure overrange is roughly 100%.The P51-50-G-G-M12-20MA-000-000 is designed for rooms that need to be kept at a certain pressure, such as automotive engines, air humidifiers, food and beverage carbonators, HVAC systems, water tanks, boilers, pumps, pipes, chemical processing equipment, and medical instruments. It is also used in buildings to measure changes in air pressure, such as when doors are opened. In addition, it can help prevent dust or liquid penetration in machines, measuring range of ventilation toxic gas.The P51-50-G-G-M12-20MA-000-000 pressure sensor features an integrated signal conditioning circuitry that enables a direct connection to a PLC or other compatible controller. The signal interfaces with 4-20mA, 2-wire interface, compatible with HART protocol. The housing of the device is made of stainless steel, allowing fluid compatibility with a range of media including liquids, gases, and hydraulic oils. The size of the sensor is standard for industrial applications; a 12-mm diameter and a length of only 20mm.The working principle of the P51-50-G-G-M12-20MA-000-000 is based on the principle of a diaphragm-type pressure sensor. The pressure of the measured media is transmitted from the process connection to the diaphragm. The diaphragm is made of a strain gauge bonded to a flexible diaphragm material which is housed inside the stainless steel housing. The deflection of the diaphragm caused by the pressure is detected by the strain gauge and converted into an electrical signal. The signal is then amplified, conditioned and outputted as a 4-20 mA signal.The P51-50-G-G-M12-20MA-000-000 pressure sensor and transducer is a reliable instrument that can measure, transmit, and control pressure in various working environments. Its stainless steel housing and other features make it suitable for a wide range of applications. The direct connection to a PLC or other compatible controller simplifies integration into sophisticated systems. The accurate conversion of pressure into an electrical signal makes operation more efficient and accurate.

The specific data is subject to PDF, and the above content is for reference