P51-50-S-AF-P-5V-000-000

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Sealed Gauge
Operating Pressure:	50 PSI (344.74 kPa)
Output Type:	Analog Voltage
Output:	1 V ~ 5 V
Accuracy:	±1%
Voltage - Supply:	8 V ~ 30 V
Port Size:	Male - 9/16" (14.29mm) UNF
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	Packard, 3 Pin
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

P51-50-S-AF-P-5V-000-000 is a pressure sensor or transducer that reports pressure changes in metric unit measurement such as bar, psi, or kPa. It is commonly used in applications that involve sensing changes in medium to high pressure. The unit is also designed for use in hostile environments. It operates with a range from 0.5–50 bar and 0.75–75 psi and features an output signal range from 5–25 mA. It supports both 3-wire and 4 wire connection.

Application Field:

The P51-50-S-AF-P-5V-000-000 pressure sensor/transducer is used in a wide range of applications, including manufacturing, processing, automotive, hydraulic systems, fluid flow, engine performance, and oil and gas production. It is also used in aerospace industry, for monitoring pressure in aircraft fuel tanks and engines. It is widely used to detect changes in fuel flow and oil pressure, to monitor pressure in air and liquid-filled tanks, and for oil and gas production.

Working Principle:

The P51-50-S-AF-P-5V-000-000 pressure sensor/transducer measures pressure using the piezoresistive effect. A strain gauge is mounted to a thin diaphragm which is exposed to the pressure being measured. The strain gauge is sensitive to any changes in the deformation of the diaphragm due to externalities (such as changes in pressure). The diaphragm also contains a reference resistor, which is used to maintain a zero reference. This reference resistor provides a measure of the strain gauge’s resistance and is used to compensate for changes in temperature. The sensitivity of the transducer is adjustable and can be adjusted by changing the reference resistor’s resistance. The strain gauge, diaphragm, and reference resistor are all connected to an integrated circuit (IC). This IC converts the voltage signal into an analog current signal, which is then sent to the output (either 3-wire or 4-wire connection). Once the signal is sent to the output, it is converted into a signal that can be readily read by the user.

Conclusion:

The P51-50-S-AF-P-5V-000-000 pressure sensor/ transducer is an essential tool for monitoring changes in pressure in demanding applications. It is designed for use in hostile environments and offers a wide range of applications. It is easy to install and use, making it a great choice for any type of pressure monitoring. This transducer uses the piezoresistive effect to measure pressure and can be connected to an output via a 3-wire or 4-wire connection. It features an adjustable sensitivity range, making it ideal for a variety of applications.

The specific data is subject to PDF, and the above content is for reference