P51-500-A-D-I36-4.5OVP-000-000

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Absolute
Operating Pressure:	500 PSI (3447.38 kPa)
Output Type:	Analog Voltage
Output:	0.5 V ~ 4.5 V
Accuracy:	±0.5%
Voltage - Supply:	5V
Port Size:	Male - 7/16" (11.11mm) UNF
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	Cable 3'
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors

Pressure sensors, also commonly known as transducers, are specialized sensing devices that convert mechanical inputs into electrical signals. The main purpose of a pressure sensor is to measure pressure, typically in a fluid or an air stream. Pressure sensors are used in numerous applications, such as to control machine automation, measure liquid levels, and to measure and monitor flow in pipes and ducts.

P51-500-A-D-I36-4.5OVP-000-000 Application Field and Working Principle

The P51-500-A-D-I36-4.5OVP-000-000 pressure sensor is an electro-mechanical device that is designed for use in Industrial Automation and Process Control applications. The device is designed to operate as a general-purpose transducer, converting applied pressure into an electrical signal.The unit is constructed from a stainless steel housing and operates from an input pressure range of 0 to 500psi. It is also equipped with a selection of output signal modes and offers an IP67-rated waterproof rating. The device is powered by a 5V DC supply, and the output signal is proportional to the applied pressure, making it ideal for use in data acquisition, control, and alarm system applications.The P51-500-A-D-I36-4.5OVP-000-000 sensor uses a strain gauge-based sensing element that consists of two cantilevered springs, each of which has a freely suspended wire strain gauge affixed to it. Applied pressure causes the springs to deflect, changing the resistance of the strain gauges. This resistance change is detected by electronic circuitry and the signal is transmitted to an analog or digital output. The strain gauge-based pressure sensing element yields excellent linearity and high accuracy.The signal generated by the P51-500-A-D-I36-4.5OVP-000-000 pressure sensor is transmitted to an analog or digital output, depending on the specific configuration. The output may be interpreted as either a DC voltage or current, or as a pulse-width modulation (PWM) signal. The desired output can be selected with a three position DIP switch, located on the top of the unit.The P51-500-A-D-I36-4.5OVP-000-000 pressure sensor is well-suited for use in applications such as industrial automation, process control, machine automation, liquid level measurement, and flow sensing. This device is robust and reliable, and is capable of providing accurate pressure measurements over a wide range of pressures.

The specific data is subject to PDF, and the above content is for reference