P51-500-A-L-M12-5V-000-000

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Absolute
Operating Pressure:	500 PSI (3447.38 kPa)
Output Type:	Analog Voltage
Output:	1 V ~ 5 V
Accuracy:	±0.5%
Voltage - Supply:	8 V ~ 30 V
Port Size:	Female - M10 x 1.25
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	M12, 4 Pin
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers

Pressure sensors, commonly known as pressure transducers, are transducers that are used to measure pressure and convert it into an electrical signal. The P51-500-A-L-M12-5V-000-000 is a pressure sensor designed for applications such as medical, industrial, and automotive. This article will explore the application field and working principle of the mentioned pressure sensor.The P51-500-A-L-M12-5V-000-000 pressure sensor is designed to measure relative and absolute pressure. It has a max pressure rating of 500 bar and a max temperature of 150°C. It is also resistant to shock and has a low-noise output. Additionally, the sensor has an analog voltage output with an accuracy of 0.1%.The P51-500-A-L-M12-5V-000-000 is most often used in industrial and automotive applications, such as measuring the oil pressure in a car engine or the pressure of a hydraulic system. It can also be used in medical applications, such as non-invasive blood pressure monitoring. The sensor is also used in industrial settings for measuring the pressure of gases and liquids.The working principle of the P51-500-A-L-M12-5V-000-000 pressure sensor is based on a strain gauge bridge. When the pressure is applied to the bridge, it causes the bridge to stretch, thus changing its resistance. This change in resistance is then detected by the electronics of the sensor and converted into an electrical output.The output of the P51-500-A-L-M12-5V-000-000 can be used as an input for an analog to digital converter (ADC) or as an input for an embedded microcontroller. The ADC can then be used to convert the output into digital values while the microcontroller can be used to control the system based on the measured value.In conclusion, the P51-500-A-L-M12-5V-000-000 pressure sensor is an accurate and versatile pressure sensor designed for a variety of applications. It is based on a strain gauge bridge, which changes its resistance when pressure is applied. This change is then converted into an electrical output, which can then be used to control the system based on the measured value.

The specific data is subject to PDF, and the above content is for reference