Allicdata Part #: | P51-500-S-I-I12-20MA-000-000-ND |
Manufacturer Part#: |
P51-500-S-I-I12-20MA-000-000 |
Price: | $ 93.26 |
Product Category: | Sensors, Transducers |
Manufacturer: | SSI Technologies Inc |
Short Description: | SENSOR 500PSIS 7/16 UNF 4-20 MA |
More Detail: | Pressure Sensor 500 PSI (3447.38 kPa) Sealed Gauge... |
DataSheet: | P51-500-S-I-I12-20MA-000-000 Datasheet/PDF |
Quantity: | 1000 |
5 +: | $ 84.77770 |
Series: | MediaSensor™ |
Part Status: | Active |
Pressure Type: | Sealed Gauge |
Operating Pressure: | 500 PSI (3447.38 kPa) |
Output Type: | Analog Current |
Output: | 4 mA ~ 20 mA |
Accuracy: | ±0.5% |
Voltage - Supply: | 8 V ~ 30 V |
Port Size: | Male - 7/16" (11.11mm) UNF |
Port Style: | Threaded |
Features: | Amplified Output, Temperature Compensated |
Termination Style: | Cable 1' |
Maximum Pressure: | -- |
Operating Temperature: | -40°C ~ 105°C |
Package / Case: | Cylinder |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A P51-500-S-I-I12-20MA-000-000 is a pressure sensor, transducer and/or transmitter, and is an electronic device which is used to measure and convert pressure into electrical signals. It is a type of industrial-grade instrument which is commonly used in industrial applications to monitor and control pressure, measure flow, and detect leakages. It is also used in many safety and control systems.
The p51-500-s-i-i12-20ma-000-000 can be used in a wide range of applications where reliable and consistent pressure measurement is needed. It is widely used in the aerospace, automotive, petroleum, and other industrial sectors. It can also be used in medical and consumer applications.
The p51-500-s-i-i12-20ma-000-000 is designed to be very reliable, accurate, and stable. It has a high degree of accuracy, and is able to read extremely low levels of pressure without error. It is also designed for long-term use. The accuracy of the pressure reading is further improved by the use of calibration.
The pressureensor is typically mounted on a mounting plate or in an enclosure. It is connected to the system via a standard electrical connection. It is usually powered using a low voltage DC power supply. The signal output is sent via a cable to the control system.
In operation, this pressure sensor operates by converting mechanical energy into electrical energy. It works by converting pressure into electrical signals. The output voltage is proportional to the applied pressure. The output voltage is then passed through an amplifier to create the output current.
The output of the p51-500-s-i-i12-20ma-000-000 is usually a current or a voltage, depending on the type of sensor. The output is usually a 4-20mA current, but some models can offer other current ranges. It is important to note that the accuracy of the pressure reading is dependent on the accuracy of the voltage output and vice versa.
The working principle of the p51-500-s-i-i12-20ma-000-000 is based on the principle of mass balance; it measures force exerted on a diaphragm or membrane, and this force is proportional to the applied pressure. When the pressure is increased, the force exerted on the diaphragm will increase, which will cause the output voltage to increase. As the pressure decreases, the force exerted on the diaphragm will decrease, which will cause the output voltage to decrease.
The p51-500-s-i-i12-20ma-000-000 is an extremely reliable and accurate pressure sensor, and is widely used in industries across the world. It is an important component in numerous safety and control systems, and is highly dependable in many applications.
The specific data is subject to PDF, and the above content is for reference
SST PRESSURE TRANSDUCERPressure Sensor
PRSSR TRNS 0-100BR 4-20MA DINPressure Se...
BRD MNT PRESSURE SENSORSPressure Sensor ...
BRD MNT PRESSURE SENSORSPressure Sensor ...
HEAVY DUTY PRESSURE TRANSDUCERPressure S...
BRD MNT PRESSURE SENSORSPressure Sensor ...