P51-500-S-R-D-4.5OVP-000-000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure transducers and sensors are widely available in a variety of shapes, sizes and capabilities, and they are used to measure the pressure of gases or liquids in a system. The P51-500-S-R-D-4.5OVP-000-000 is a specific type of pressure transducer, and it has a variety of different applications and working principles.

Application Field and Working Principles of P51-500-S-R-D-4.5OVP-000-000

The P51-500-S-R-D-4.5OVP-000-000 is a differential pressure transducer with a 4.5 to 5V output. It is designed to measure the differential pressure of air or liquid within a system. It is most commonly used in water filtration and fuel systems, as well as in gas and liquid based applications. Some of the other common applications include air flow measurement, pump and valve control, pressure switch set points, water level/pressure control and in HVAC systems. The P51-500-S-R-D-4.5OVP-000-000 has an both an electrical and physical connection and it is typically connected to a minimum/maximum pressure switch or a gauge. The main components of the P51-500-S-R-D-4.5OVP-000-000 are the pressure sensor, the aluminium case, the connector and the pressure fittings.

The pressure sensor is the most important component of the P51-500-S-R-D-4.5OVP-000-000 and it is responsible for measuring the pressure of the system. It is typically a capacitive device that uses a combination of two diaphragms and spacers to measure the pressure. When the pressure changes, the device reads the change in capacitance and converts this into an electrical signal that is then outputted from the device.

The pressure fittings are also important components and they are used to provide a connection between the pressure sensor and the system. Depending on the application, the fitting will usually consist of either a screwed or bayonet fitting which is used to connect to the measuring system. The pressure fittings also provide a seal between the sensor and the system to ensure that the pressure is accurately measure.

The aluminium case is also necessary as it protects the pressure sensor from different environmental conditions. The case comes with several features such as a vent hole, an internal access port, and a mounting flange. It also ensures that the pressure sensor is attached securely to the component and it also helps in providing a good electrical connection.

The final components of the P51-500-S-R-D-4.5OVP-000-000 are the electrical connector and the pressure fittings. The electrical connector is used to provide an electrical connection between the pressure sensor and the main instrumentation system. The pressure fittings are used to provide a connection between the pressure sensor and the system.

The P51-500-S-R-D-4.5OVP-000-000 is a versatile and reliable pressure transducer with a wide range of applications. It is easy to use and offers a reliable and precise way of measuring the pressure of a system. By using the appropriate pressure fitting, the device can be used in a wide range of applications and it ensures that the measured pressure is accurate and precise. Additionally, it is protected from the external environment due to the aluminium case, which has several features that ensure the device is securely attached to the component.

The specific data is subject to PDF, and the above content is for reference