| Allicdata Part #: | P51-75-G-T-M12-4.5V-000-000-ND |
| Manufacturer Part#: |
P51-75-G-T-M12-4.5V-000-000 |
| Price: | $ 150.30 |
| Product Category: | Sensors, Transducers |
| Manufacturer: | SSI Technologies Inc |
| Short Description: | SENSOR 75PSI 7/16-20-2B .5-4.5V |
| More Detail: | Pressure Sensor 75 PSI (517.11 kPa) Vented Gauge F... |
| DataSheet: |  P51-75-G-T-M12-4.5V-000-000 Datasheet/PDF |
| Quantity: | 1000 |
| 5 +: | $ 136.63800 |
| Series: | MediaSensor™ |
| Part Status: | Active |
| Pressure Type: | Vented Gauge |
| Operating Pressure: | 75 PSI (517.11 kPa) |
| Output Type: | Analog Voltage |
| Output: | 0.5 V ~ 4.5 V |
| Accuracy: | ±0.5% |
| Voltage - Supply: | 5V |
| Port Size: | Female - 7/16" (11.11mm) UNF |
| Port Style: | Threaded |
| Features: | Amplified Output, Temperature Compensated |
| Termination Style: | M12, 4 Pin |
| Maximum Pressure: | -- |
| Operating Temperature: | -40°C ~ 105°C |
| Package / Case: | Cylinder |
| Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The P51-75-G-T-M12-4.5V-000-000 is a pressure sensor and transducer that combines a sensing element, signal conditioning circuitry, and an output signal to measure pressure or force. This pressure sensor is designed to sense and monitor the pressure of a wide range of fluids or gases in a variety of industrial and commercial applications.
Applications
The P51-75-G-T-M12-4.5V-000-000 is ideal for use in different applications, including, but not limited to monitoring air pressure in automotive tires, medical equipment, and HVAC systems. It can also be used for measuring fluid levels in water tanks, measuring flow of liquids, controlling pneumatic valves, and sensing pressure of gas and vacuum. This pressure sensor is designed to provide an accurate, reliable, and cost-effective solution for a wide range of industrial, commercial, and automotive applications.
Working Principle
The P51-75-G-T-M12-4.5V-000-000 works on a simple principle, where a diaphragm is used to detect changes in pressure. This diaphragm deforms in response to pressure changes and drives a Wheatstone bridge circuit, which is pre-calibrated to provide an electrical output that corresponds to the measured pressure. The signal is then amplified, conditioned, and output to a suitable display unit. The output of the pressure sensor can also be connected to a control system to regulate the pressure of a system or to protect the system from overpressure.
Conclusion
The P51-75-G-T-M12-4.5V-000-000 is a reliable and cost-effective pressure sensor and transducer designed for a wide variety of industrial and commercial applications. This pressure sensor is equipped with a sensing element, signal conditioning circuitry, and output signal for measuring and monitoring pressures from a wide range of fluids and gases. The sensor works on a simple principle, where it uses a diaphragm to detect pressure changes and then outputs an electrical signal that corresponds to the measured pressure.
The specific data is subject to PDF, and the above content is for reference
SST PRESSURE TRANSDUCERPressure Sensor
PRSSR TRNS 0-100BR 4-20MA DINPressure Se...
BRD MNT PRESSURE SENSORSPressure Sensor ...
BRD MNT PRESSURE SENSORSPressure Sensor ...
HEAVY DUTY PRESSURE TRANSDUCERPressure S...
BRD MNT PRESSURE SENSORSPressure Sensor ...