P51-750-A-B-P-4.5V-000-000

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Absolute
Operating Pressure:	750 PSI (5171.07 kPa)
Output Type:	Analog Voltage
Output:	0.5 V ~ 4.5 V
Accuracy:	±0.5%
Voltage - Supply:	5V
Port Size:	Male - 1/8" (3.18mm) NPT
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	Packard, 3 Pin
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers

The P51-750-A-B-P-4.5V-000-000 is a type of pressure transducer module that uniquely combines pressure sensing, temperature sensing, signal conditioning, and an output signal all in one device. It is specifically designed for use in industrial and commercial applications that require reliable and accurate pressure measurements. This article will discuss the application field and working principle of the P51-750-A-B-P-4.5V-000-000 Pressure Transducer Module.The P51-750-A-B-P-4.5V-000-000 Pressure Transducer Module can be used in many different types of applications, ranging from water and air pressure measurement to scientific laboratories. The module is designed with a wide range of pressure measurement capabilities, allowing it to be used in highly-variable environments. The device also has a fast response time and good repeatability, making it ideal for applications where accuracy and reliability are of the utmost importance.The working principle of the P51-750-A-B-P-4.5V-000-000 Pressure Transducer Module is relatively simple. The module is a differential capacitive pressure transducer, which means that it uses two capacitors to measure pressure. The capacitors are connected to a Wheatstone bridge circuit, and the resistance between the two capacitors is used to determine the pressure value. The Wheatstone bridge is in a constant state of balance, and when the pressure is applied to the input of the module, the capacitance changes, causing the circuit to become imbalanced and resulting in an output voltage. This voltage is then calculated back to a pressure value using a look-up table.The P51-750-A-B-P-4.5V-000-000 Pressure Transducer Module is capable of measuring pressures ranging from 0-750bar, and is accurate to within ±0.25% FS. The module also has a diagnostic signal output that provides information on the bridge health as well as output port offset and noise levels. To further enhance accuracy, temperature compensation can be enabled to ensure that the readings are not affected by changes in temperature.The P51-750-A-B-P-4.5V-000-000 Pressure Transducer Module is a reliable and accurate pressure transducer module that is perfect for industrial and commercial applications. The module is highly accurate and offers a fast response time and good repeatability, making it ideal for applications where precision and reliability are of paramount importance. The differential capacitive pressure sensing principle employed by the device allows it to measure pressure values accurately and consistently, while the diagnostic output ensures that the module is running optimally. The module’s temperature compensation, meanwhile, ensures that readings are not affected by changes in temperature and that results remain consistent. All of these features, coupled with the device’s small size and low-power consumption, make the P51-750-A-B-P-4.5V-000-000 Pressure Transducer Module a great choice for a wide range of pressure measurement applications.

The specific data is subject to PDF, and the above content is for reference