Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Absolute
Operating Pressure:	750 PSI (5171.07 kPa)
Output Type:	Analog Current
Output:	4 mA ~ 20 mA
Accuracy:	±0.5%
Voltage - Supply:	8 V ~ 30 V
Port Size:	Female - 7/16" (11.11mm) UNF
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	Deutsch, 3 Pin
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers

An important device used in measuring and controlling pressure is the P51-750-A-T-D-20MA-000-000 pressure sensor transducer. In this article, we will discuss the application field and working principle of the P51-750-A-T-D-20MA-000-000 pressure sensor transducer.The P51-750-A-T-D-20MA-000-000 pressure sensor transducer is used to measure gauge pressure in many industrial applications. This type of pressure sensor is capable of measuring pressures up to 750 PSI, and is capable of measuring both vacuum and pressure. It is suitable for use in a wide range of industrial applications, such as hydraulic systems, pneumatic systems, process control systems, and HVAC systems.The working principle of the P51-750-A-T-D-20MA-000-000 pressure sensor transducer is based on the Wheatstone bridge circuit. This circuit consists of four resistors, two of which are connected in series, and two of which are connected in parallel. The two connected in series create a balanced bridge circuit which is then across a fixed voltage source. The two connected in parallel form a variable resistor which is connected across the two fixed resistors. When there is a change in pressure, it results in a change in resistance across the variable resistor, which is then detected by the bridge circuit and translated into an electrical signal.The P51-750-A-T-D-20MA-000-000 pressure sensor transducer is also capable of measuring differential pressure. The differential pressure is determined by measuring the difference between two pressures, such as the pressure in a hydraulic system and the pressure in the atmosphere. This is done by using two pressure sensor transducers, each one connected across a Wheatstone bridge circuit. The difference in pressure is then measured by the bridge circuit and translated into an electrical signal.The P51-750-A-T-D-20MA-000-000 pressure sensor transducer is also capable of measuring vacuum. This is done by using the Wheatstone bridge circuit, but with the variable resistor connected in reverse. When there is a change in vacuum, it causes a change in resistance across the variable resistor, which is then detected by the bridge circuit and translated into an electrical signal.The P51-750-A-T-D-20MA-000-000 pressure sensor transducer is also capable of providing highly accurate readings. This is done by using a wide range of pressure sensing elements and signal conditioning circuits which enable the sensor to provide highly precise readings. The transducer is also capable of providing temperature compensation, which is especially important when measuring pressure in extreme temperatures.In summary, the P51-750-A-T-D-20MA-000-000 pressure sensor transducer is an important device used in measuring and controlling pressure in many industrial applications. It is capable of measuring a wide range of pressures, from vacuum to high pressures, and is capable of providing highly accurate readings. This makes it an ideal solution for measuring and controlling pressure in many industrial applications.

The specific data is subject to PDF, and the above content is for reference