P61-3000-S-A-I12-4.5V-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

P61-3000-S-A-I12-4.5V-A is suitable for a variety of pressure and strain transducers. It has a wide application field and can be used for both dynamic and static applications. The sensor is built around a single bridge circuit which converts input pressure into a resistive pressure signal. The signal is then converted into a 4.5 V analog output signal.

In order to work properly, the sensor requires an appropriate power source. It can be powered with an AC or DC source. The power supply should be isolated from the input signal in order to prevent any errors in the measurement. The output signal can be easily adjusted by adjusting the bridge resistors on the front panel of the sensor.

The working principle of the P61-3000-S-A-I12-4.5V-A pressure transducer is based on anominal Wheatstone bridge circuit. This circuit consists of four resistors arranged in a square formation. When a pressure is applied to the resistors, a differential voltage is developed between the two output points on the bridge circuit. This differential voltage is proportional to the applied pressure, and is an analog signal.

The bridge circuit is then amplified using an operational amplifier. The amplified signal is then converted into a 4.5 volt analog output signal. The output signal is then used to measure the pressure. The sensor can be used to measure both static and dynamic pressure. In static pressure measurements, the sensing transducer remains in contact with the pressure sensor and the pressure can be read directly from the output signal. In dynamic pressure measurements, the output signal is sampled at regular intervals to directly measure the pressure over time.

The P61-3000-S-A-I12-4.5V-A pressure transducer is suitable for a wide variety of pressure measurements. It is a reliable and accurate tool for pressure sensing applications. In addition, the sensor can be easily connected to other systems using appropriate signal conditioning circuitry. The sensor can be used for both static and dynamic pressure measurements.

The specific data is subject to PDF, and the above content is for reference