PAA140

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSR) are electrical devices that control current using semiconductor devices such as thyristors, transistors, and triacs. They are used for switch control and are a great alternative to mechanical relays. PAA140 is a type of Solid State Relay manufactured by Phoenix Contact. It is an optically isolated, logic pole, 3-pole, changeover switch designed for direct current loads. The product has a maximum continuous output current of 16A and a maximum breakdown voltage of 400V.

The primary application field of PAA140 is home and industrial automation. It is typically used to control and monitor lights and temperature, which makes it suitable for both residential and commercial applications. This device can also be used in industrial processes such as controlling motors, pumps, and other industrial machines. It is also often used in electronic devices such as televisions, fax machines, washing machines, and similar gadgets.

The working principle of PAA140 is based on the properties of semiconductor devices. The device is composed of three parts: a diode bridge with two thyristors, a filter capacitor, and an opto-triac. The diode bridge is responsible for converting an alternating current (AC) voltage to direct current (DC) and isolating the AC and DC sides of the circuit. The filter capacitor is then used to keep the output voltage at the desired level. Finally, the opto-triac is used to turn the Power Source On and Off, depending on the input given to the relay.

The input given to the relay is usually derived from a controller or digital logic circuit. The active input (the collector of the transistor) is connected to the anode of the thyristor, while the inactive input (the emitter of the transistor) is connected to the cathode of the thyristor. The collector then determines the states of the thyristor and whether or not it is conducting current to the load. When the collector voltage is high (which will turn on the thyristor and allow the current to flow through the load), the Power Source is turned on. Conversely, when the collector voltage is low, the thyristor is turned off and the Power Source is turned off as well.

In summary, PAA140 is a type of Solid State Relay that is used in home and industrial automation applications. It is composed of a diode bridge with two thyristors, a filter capacitor, and an opto-triac, and is activated by an input derived from a controller or digital logic circuit. When the collector voltage is high, the Power Source is turned on and current will flow through the load. When the collector voltage is low, the Power Source is turned off and the load is no longer powered.

The specific data is subject to PDF, and the above content is for reference