PC3H410NIP1B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PC3H410NIP1B is a Photovoltaic Output Transistor Optoisolator belonging to the PC3H series by Panasonic. An optoisolator is an essential device that provides noise isolation and electrical protection between two circuits. It also serves the purpose of electrical isolation and electrical and optical coupling.

In the PC3H410NIP1B, one side has a photo-sensitive (photovoltaic) cell which is light activated. This converts the light energy into a current that is able to flow in a single direction. The photovoltaic cell is connected to a transistor, hence the name. The transistor is used to switch the circuit as it controls the current flow between output and ground. This transistor is able to work in a similar fashion and displays the same characteristics as a regular transistor.

The main application field of PC3H410NIP1B is for the protection of Single-Board Computers and micro-controller based systems. This is done by providing optical isolation between the processor in the system and any external inputs or outputs. This will prevent interferences from turning off the processor or even damaging the complete system due to the high voltages present. This optoisolator can be used when dealing with electrical signals such as limit switches, digital and analog sensors, motor controls, and switches.

This device also serves to reduce the risk of noise interference from equipment such as motors, power supplies, and vacuum devices. It has the capability to power an output side device such as an LED if necessary. This is because it has an input power of 3V to 15V, making it useful for many applications where an uninterrupted power supply is required.

The PC3H410NIP1B has a current transfer ratio (IC) of 13mA to 20mA, and a direct input current of 2mA typical. This means that this device can only provide low-voltage output signals when compared to other optoisolators. In order to take advantage of this, the device should be used with an electric comparator. An electric comparator is an electronic circuit for comparing two voltages or currents that are within a certain range.

The working principle of the PC3H410NIP1B is simple. It consists of a photovoltaic cell, a transistor, and a signal amplifier. The photovoltaic cell is used to detect the presence of light. This cell starts to conduct current when it is exposed to light. This current flow is then switched on and off by the transistor, which is the main switching component of the device. The signal amplifier is then used to amplify any signal that comes into the device. The output from the amplifier is then sent to the output.

Thus the PC3H410NIP1B is an easy to use photovoltaic output transistor optoisolator. It is able to provide isolation and noise reduction and is useful in a variety of applications from interfacing and controlling external equipment to providing protection for computer systems. Its low voltage output signals make it suitable for use with electric comparators. It’s working principle is simple yet effective and the device itself is reliable and cost-effective.

The specific data is subject to PDF, and the above content is for reference