PC3H7J00000F Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are a type of circuit component used to transfer electrical signals while isolating the two circuits electrically from each other. They are commonly used for protection against electrical hazards, such as electrostatic discharge, in electronic devices. The PC3H7J00000F is a type of optoisolator with a transistor-photovoltaic output. This specific optoisolator is built using transistor and photovoltaic technologies, which allows it to provide electrical isolation between the input and the output. It is composed of a light-emitting diode (LED) that is optically coupled to a phototransistor, which serves as the output. The LED emits light when given an adequate voltage, then the phototransistor responds to the light by changing its electrical output. The PC3H7J00000F optoisolator is most commonly used in applications where feedback or additional control is required, such as motor control, automotive electronics, and communication systems. It is also used to improve the performance of digital-only systems when reliability is important.

The PC3H7J00000F optoisolator has a wide range of operating conditions, ranging from -55°C to +85°C on the ambient temperature, with a maximum operating temperature of 85°C. The input voltage range is from 3V to 30V, with a minimum rated input of 3V and a maximum rated input of 30V. It also has a wide range of output levels, from 1mA to 80mA, with a minimum rated output current of 1mA and a maximum rated output current of 80mA. The total power dissipation of the device is 110mW. Lastly, the device has a storage temperature range of -40°C to +125°C.

The PC3H7J00000F optoisolator works by isolating the input and output circuits using a light sensitive device. The optoisolator contains an LED, which emits light when a voltage is applied across it, and a phototransistor, which responds to the light by changing its electrical output. When the voltage across the LED is greater than the breakdown voltage of the LED, the LED emits light. The light is then sensed by the phototransistor, which then changes its electrical output in response to the light. This change in the electrical output is then used to control the output of the optoisolator. This is the working principle of the PC3H7J00000F optoisolator.

The PC3H7J00000F optoisolator is widely used in various applications due to its ability to provide electrical isolation between the input and output circuits. It is primarily used in motor control, automotive electronics, and communication systems. The device is also used to improve the performance of digital-only systems when reliability is important. Additionally, it is often used in applications where feedback or additional control is required, such as PLC systems, door control systems, and industrial control systems. The optoisolator is also used in consumer electronics, such as digital cameras, MP3 players, and television sets.

In conclusion, the PC3H7J00000F optoisolator is a device that provides electrical isolation between the input and output circuits. It is commonly used in applications where feedback or additional control is required, and is also used to improve the performance of digital-only systems. The optoisolator works by using a light sensitive device, such as an LED and a phototransistor, to sense the light emitted by the LED and change its electrical output accordingly. The device is also suitable for a wide range of applications, from motor control to consumer electronics.

The specific data is subject to PDF, and the above content is for reference