PC3SG21YIZ0F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Triac, SCR Output

PC3SG21YIZ0F is a type of optoisolator, or optocoupler, using a Triac and a SCR as output devices. Used in areas where electrical isolation is a requirement, optoisolators use an infrared LED inside a plastic package to transmit the input signal over a short gap to separate circuit sections. As electrical isolation is achieved, the gap between sections carries no electrical power and hence the device is used to pass a signal without any load or power being passed between two points.

Application Field

PC3SG21YIZ0F optoisolator can be found in a wide range of applications. Its main purpose is to provide electrical isolation between two separate circuits. It is as useful for industrial or commercial applications such as motor and sensor circuits, as it is for medical industry purposes, and in instrumentation and control. Its connection to an AC power source makes it most suitable for protection in areas where it is necessary to reduce the potential for electrical shocks.

Working Principle

When a current is applied to the input side of the PC3SG21YIZ0F optoisolator, the infrared LED begins to emit a steady stream of light. This light then strikes the photoresistor on the other side. Upon contact, a current is allowed to flow through the SCR/Triac and out to the second circuit. In the "on" position, it functions as an open switch where the current can pass from the SCR/Triac to the second circuit, thus allowing the signal to travel. When the current is removed from the input side, the LED ceases to emit light, which in turn effectively turns the switch off.

Advantages

The main advantage of using the PC3SG21YIZ0F is its ability to provide electrical isolation between two separate circuits. By separating the two circuits electrically, the possibility of failures due to shorts, surges, or ground loops is eliminated. Additionally, it does not require any additional voltage harmonics, which could potentially interfere with other systems. As a result, the signal transmission is reliable and sensitive control is easily achievable.

Conclusion

The PC3SG21YIZ0F optoisolator is an important component used in many areas, where electrical isolation between two circuits is necessary. Its use has a wide range of applications and advantages, from reliable signal transmission and sensitive control, to reduced potential for electrical shocks due to its connection to an AC power source. By implementing this device into electrical systems, many problems are eliminated, making it a valuable and highly useful device.

The specific data is subject to PDF, and the above content is for reference