PC401 Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output are components used to signal data and provide protection at the same time. The PC401 Optoisolator is a particularly advanced model of this type of components and it can be used in a variety of applications.

The PC401 Optoisolator has a logic output circuit that uses an optically coupled device to generate a fast, noise-immune low-level logic pulse when illuminated with an appropriate signal. An infrared LED on one side is electrically isolated from the logic circuit on the other side, with the two sides communicating only through light.

The PC401 Optoisolator is a fast and reliable device for 24V DC applications. It is a uni-directional device, which means that the output is only activated when the input signal is active. This means that the device can be used to protect more sensitive electronic components from overload and short circuits.

The PC401 Optoisolator is primarily used for isolating digital signals and protecting circuits against any overload or short circuit conditions. This device is typically used in applications such as:

• Processor-based control systems
• Home automation systems
• Industrial automation machinery
• CCTV systems
• Lighting networks
• Test equipment
• Industrial load cell systems
• Robotics

The PC401 Optoisolator is designed to operate with 24V DC. This device is designed for logic and relay type applications and is suitable for a wide variety of control system applications. It has a wide operating temperature range and is capable of providing a highly reliable logic output.

The PC401 Optoisolator consists of a Light Emitting Diode (LED) and a photodetector. The LED is connected to the input signal, while the photodetector is connected to the logic circuit. When the LED is illuminated by an appropriate input signal, the photodetector will generate a small electrical current, which in turn will activate the logic circuit. As the LED and photodetector are isolated from each other by a gap, this allows them to operate without interference.

This device is designed for low-level logic and is not suitable for driving loads over 50mA. The PC401 Optoisolator is designed for data transmission and is capable of operating at up to 25MHZ. The PC401 Optoisolator also provides isolation between input signals and the output so that the logic circuit is protected from noise and interference.

The PC401 Optoisolator is a fast and reliable device for 24V DC applications. It is a uni-directional device, which means that the output is only activated when the input signal is active. This device is typically used for data transmission, signal isolation, and protection of circuits from overloads and short circuits. It is an ideal choice for a wide variety of control system applications.

The specific data is subject to PDF, and the above content is for reference