PCF14JT510K

Series:	CF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	510 kOhms
Tolerance:	±5%
Power (Watts):	0.25W, 1/4W
Composition:	Carbon Film
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	0/ -850ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial, Radial Bend
Supplier Device Package:	Panasert
Size / Dimension:	0.091" Dia x 0.236" L (2.30mm x 6.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are one of the most common components used in circuit boards. The PCF14JT510 K application field and working principle is particularly important for designers who need to understand its various features and functionalities. The PCF14JT510K is a through-hole resistor type with a rated wattage of 10 watts. A through-hole resistor is a resistor whose body extends through the board, making it stronger and able to dissipate more heat than a smaller chip resistor. Additionally, the through-hole design makes them more durable and reliable than wire wound resistors. The PCF14JT510K has an operating temperature range of -60°C to 130°C with a resistance of 5 KΩ. It also has a tolerance rating of ±10%. This means that the actual resistance may vary by up to 10% compared to a standard 5 KΩ anti-surface-mount resistor. It consists of a carbon composition resistor with a metal case and insulating elements. The insulating elements are a plastic tube filled with an epoxy resin for environmental protection. The maximum working voltage rating of the PCF14JT510K is approximately 200 VDC. The maximum power rating is up to 10 watts with an ambient temperature range of -60°C-70°C. The insulation resistance is typically higher than 10 MΩ at 100 VDC. The PCF14JT510K is designed for a variety of applications that require high power resistors such as automotive, industrial, home appliance, and consumer electronics. These resistors can be used for voltage dividers, current limiters, or attenuators for active and passive filters. They are also used as power supplies for repetitive load switching, and for inductive loads. The use of this component is relatively straightforward. The first step in using this component is to calculate the correct wattage based on the load requirements. The wattage will determine the size or type of resistor that should be used. It is important to make sure that the wattage of the component is capable of handling the power requirements of the circuit.Once the wattage has been determined, the component can be installed in the circuit board. The resistor should be soldered onto the board exactly as shown in the datasheet. This will ensure that it is installed correctly and won’t be subjected to other electrical forces that could cause it to work improperly. Once the resistor has been installed, it is important to make sure that it is still operating within the thermal limits. If the resistor is generating too much heat, additional cooling measures may need to be taken in order to prevent it from burning up. The ambient temperature should also be taken into consideration when designing a circuit board as the resistor will operate at different levels in different temperatures. In conclusion, the PCF14JT510K is a through-hole resistor with a variety of uses in various electronic circuits. This component is reliable and durable, and can handle up to 10 watts of power. The wattage of the resistor should be determined beforehand to ensure that it can handle the power requirements of the circuit. Additionally, it is important to pay attention to the ambient temperature and ensure that the component is not generating too much heat.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description