Allicdata Part #: | PCS3P8103AG-06JR-ND |
Manufacturer Part#: |
PCS3P8103AG-06JR |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ON Semiconductor |
Short Description: | IC CLK EMI REDUCTION FREQ TSOT-6 |
More Detail: | N/A |
DataSheet: | PCS3P8103AG-06JR Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Differential - Input:Output: | No/No |
Base Part Number: | PCS3P8103A |
Supplier Device Package: | TSOT-23-6 |
Package / Case: | SOT-23-6 Thin, TSOT-23-6 |
Mounting Type: | Surface Mount |
Operating Temperature: | 0°C ~ 70°C |
Voltage - Supply: | 3 V ~ 3.6 V |
Divider/Multiplier: | Yes/Yes |
Frequency - Max: | 66.66MHz |
Series: | -- |
Ratio - Input:Output: | 1:1 |
Number of Circuits: | 1 |
Output: | Clock |
Input: | Clock, Crystal |
PLL: | Yes |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
PECS3P8103AG-06JR is a Clock Generator, Phase Locked Loop (PLL), Frequency Synthesizer integrated circuit. It is designed to work in any electronic system where multiple clock signals of a frequency or multiple phased clock signals are required. The main components of the circuit are a voltage-controlled oscillator, a programmable divider, and a phase detector.
Clock Generator, PLL, and Frequency Synthesizer technology are typically used in synchronous digital systems and their applications include digital logic and computer designs. The two primary uses of Clock Generators, PLLs, and Frequency Synthesizers are to provide stable timing signals and to reduce jitter and clock drift. The PECS3P8103AG-06JR integrates these features into one device that has a programmable oscillator, a programmable divider, and a phase detector to provide timing solutions without requiring separate components.
The PECS3P8103AG-06JR works in much the same way as traditional Clock Generators, PLLs, and Frequency Synthesizers. The voltage-controlled oscillator (VCO) is the central device in the design, and the other components interact with the VCO to create the clock signal. The voltage-controlled oscillator works by producing an oscillation frequency (or pulses) based on the input voltage. The programmable divider divides the output signal from the VCO into sub-frequencies. The divider can be programmed to set the frequency of each divided output signal.
In addition to the programmable divider, the PECS3P8103AG-06JR also has a phase detector. This device is used to synchronize the output signals of the VCO and the divider. It compares the input and output signals and makes any necessary adjustments to the frequency of the output signal to ensure the two signals stay in sync. The phase detector also ensures that the jitter and clock drift are minimized which is a key requirement in most digital systems.
The PECS3P8103AG-06JR offers many advantages over other clock generators, PLLs, and frequency synthesizers. The most important advantage is its ability to operate without linear or digital filters, thus allowing it to be used in high-temperature applications. Additionally, the circuit requires less board space and has a low-noise output, making it ideal for clock timing applications. Additionally, it has wide frequency range and low power consumption. It also supports a wide range of interface protocols including 1-Wire and I2C.
The PECS3P8103AG-06JR is ideal for embedded applications where a stable and accurate clock signal is needed. It is also suitable for use in communications and embedded systems and can provide reliable performance in a wide range of environmental conditions. It is available in a variety of packages to accommodate different customer needs.
In conclusion, the PECS3P8103AG-06JR is a highly advanced clock generator, PLL and frequency synthesizer. It is designed for use in communications and embedded systems, and it offers high stability, a wide frequency range, and low power consumption. It is an ideal solution for any application requiring a stable and accurate clock signal.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PCS3P8504AG-08CR | ON Semicondu... | 0.43 $ | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P7303AG-08CR | ON Semicondu... | 0.51 $ | 3000 | IC CLK EMI REDUCTION FREQ... |
PCS3PS550AG-08CR | ON Semicondu... | -- | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P25811AG08SR | ON Semicondu... | 0.85 $ | 1000 | IC CLOCK GEN 4-32MHZ 8-SO... |
PCS3I6100AG-06JR | ON Semicondu... | -- | 1000 | IC CLK GEN VDP MULT PIXEL... |
PCS3I6200AG-06JR | ON Semicondu... | 0.0 $ | 1000 | IC CLK GEN VDP MULT PIXEL... |
PCS3I7100AG-06JR | ON Semicondu... | -- | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P2042BG-08TR | ON Semicondu... | -- | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P2042BG-08TT | ON Semicondu... | 0.0 $ | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P2537AG-08CR | ON Semicondu... | 0.0 $ | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P7300AG-08SR | ON Semicondu... | 0.0 $ | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P7300AG-08ST | ON Semicondu... | 0.0 $ | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P7300AG-08TR | ON Semicondu... | 0.0 $ | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P7300AG-08TT | ON Semicondu... | 0.0 $ | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P7303AG-08TR | ON Semicondu... | 0.0 $ | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P73U00AG08TR | ON Semicondu... | 0.0 $ | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3P8103AG-06JR | ON Semicondu... | 0.0 $ | 1000 | IC CLK EMI REDUCTION FREQ... |
PCS3I8504AG-08CR | ON Semicondu... | 0.0 $ | 1000 | IC CLOCK PEAK EMI GP 8WDF... |
IC DRIVER CLK PLL 160MHZ 28-PLCC
IC CLOCK MANANGEMENT
IC CLOCK GENERATOR LVCMOS 16QSOP
IC SYNTHESIZER LVPECL 32VFQFN
IC CLK GENERATION CHIP 16QFN
IC CLOCK RATE ADAPTER 16SOIC