PCV1D151MCL1GS

Lifetime @ Temp.:	3000 Hrs @ 105°C
Package / Case:	Radial, Can - SMD
Mounting Type:	Surface Mount
Surface Mount Land Size:	0.406" L x 0.406" W (10.30mm x 10.30mm)
Height - Seated (Max):	0.315" (8.00mm)
Size / Dimension:	0.394" Dia (10.00mm)
Lead Spacing:	--
Ripple Current @ High Frequency:	1.9A @ 100kHz
Applications:	General Purpose
Ratings:	--
Operating Temperature:	-55°C ~ 105°C
Series:	PCV
ESR (Equivalent Series Resistance):	33 mOhm
Voltage - Rated:	20V
Tolerance:	±20%
Capacitance:	150µF
Type:	Polymer
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum - Polymer Capacitors

Aluminum - polymer capacitors are commonly used passive components in many applications which are employed in low power, high frequency equipment such as portable devices, communication systems and consumer electronics. PCV1D151MCL1GS is an Aluminum-polymer capacitor made by Panasonic corporation and it is used in a variety of electronic circuits and systems.

Applications of PCV1D151MCL1GS

The PCV1D151MCL1GS capacitor is widely used as a filtering element in power supply circuits and as a coupling and decoupling capacitor. This capacitor is able to store a large amount of electrical energy, so it can be used to smoothen sharp voltage transients and improve the power efficiency of the system. The PCV1D151MCL1GS can be used to create wide-band semi-blocking attenuators, both negative- and positive-going, with an appropriate resistor connected in series with the capacitor. This capacitor can also be used in applications requiring low ESR, such as audio/video/communication systems, frequency synthesisers and general purpose power supplies. This capacitor is also used in mobile phones, office equipment and personal computers.

Working Principle of PCV1D151MCL1GS

The PCV1D151MCL1GS capacitor is an Aluminum - polymer capacitor which is constituted by using the electrolytic aluminum plate and dielectric plastic film. This electrolytic aluminum plate is coated with an alloy layer which is made of aluminum and other metals like manganese and zinc. The dielectric plastic film is pigmented with silver chloride. When a DC voltage is applied across the terminals of the capacitor, electrons will flow from the aluminum plate to the dielectric plastic film. The surface of the dielectric plastic film, will be covered with a thin layer of silver chloride, which, acting as a capacitor dielectric, will cause the electric field to be established. When the electric field is established, charges of opposite polarity are generated on the two sides of the capacitor dielectric materials. When a high frequency AC is applied to the terminals of the PCV1D151MCL1GS capacitor, the capacitor will act as a Coupling element and will cause the voltage to be transferred from one side to the other, thus regulating the current flow in the circuit.

Advantages of PCV1D151MCL1GS

The PCV1D151MCL1GS capacitor boast several advantages. The stability and reliability of the capacitance is maintained for long periods when compared to other capacitors, since it does not suffer electrolyte leakage and is resistant to heat, water and humidity. Since this capacitor is constructed from Aluminum - Polymer materials, the height of the capacitor is very small compared to other traditional electrolytic capacitors. The PCV1D151MCL1GS prevent current leakage and over-voltage saturations, allowing for a longer life time for the component. The small size also enables this capacitor to be used in denser circuit boards and higher switching speeds, which can also increase the efficiency of the system.

Conclusion

The PCV1D151MCL1GS capacitor can be used in a variety of applications and its size and wide temperature range make it an attractive choice when designing electronic circuits. Its reliable performance and stability allows the PCV1D151MCL1GS capacitor to perform in various applications and offer cost-effective solutions. The PCV1D151MCL1GS capacitor is an ideal component for general purpose filtering and coupling tasks, with its low ESR properties being an added bonus.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description