PD10AA57

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PD10AA57 is a device designed for both residential and commercial electric applications. It is a power factor regulate designed specifically for the alternating current industry. In essence, it is an inrush current controller and is ideally suited for applications such as fan motors, electric m motors, air conditioners, pumps and other similar loads.

The PD10AA57 works on the principle of controlling the initial surge of current which occurs when electric motors start their operation. Normally, these motors require a large rush of current to initiate the mechanical process needed to start up. However, such an initial surge can damage the electric system and powerlines due to the sudden increase in power load.

The PD10AA57 is designed to regulate the initial current flow and limit the peak current to a certain level. It essentially prevents overload and damage caused by the initial surge of current. The PD10AA57 is also designed to compensate for the decrease in voltage in the electric system during heavy load operations such as when multiple motors are started at once.

The PD10AA57 works by limiting the phase angle between the current and voltage and prevent the current from exceeding the rated current. It is equipped with an adjustable current limit which can be set according to the maximum current allowed for the particular load. Thus it helps ensure that the electric system does not overload due to high current surges.

The PD10AA57 also helps reduce electric losses, ensure power quality and achieve a good electric system balance. It is an ideal device for uses where multiple motors and electrical loads are involved. It can be used in residential as well as commercial applications with proper installation and set-up.

Overall, the PD10AA57 is a simple yet highly effective device for controlling the initial current surge in alternating current electric systems. It is designed to regulate the current to a safe level during start-up and prevent overloading of powerlines and electric components. It is a great tool for the commercial and residential sector to maintain electric supply quality, ensure power balance and reduce electric losses.

The specific data is subject to PDF, and the above content is for reference