PESD5V0S1BL,315 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A Transient Voltage Suppression (TVS) diode is a type of diode which is designed to protect sensitive electronic devices from electrical transients or "spikes" which can cause damage or disruption of normal operation. The PESD5V0S1BL,315 diode, which belongs to this family, is a uni-directional device which acts like a standard diode by allowing current in one direction (forward) only. It is rated with an operating voltage of 5.0V and a peak pulse power of 315W.

The primary application of this diode is the protection of low voltage (5V) digital circuits from voltage transients (5V to 12V). It is designed to clamp transient voltages above 5V to reduce the maximum voltage presented to the protected circuits. The diode typically acts in nanoseconds to respond to an over-voltage spike, where it acts like a voltage regulator by clamping the voltage at a set level (5V in this case). In its normal state the diode appears as an open circuit therefore it will not affect the normal flow of current through the circuit.

The working principle of the PESD5V0S1BL,315 diode is based on the reversed biased P-N junction. When the diode is in a negative environment, it is not conducting current since there is no electric field created to separate the two charges on the junction. The applied voltage is higher than the breakdown voltage of the P-N junction. This also makes it impossible for current to pass through.

When the voltage at the input side is higher than the breakdown voltage of the diode, a strong electric field is created and the electrons on the junction are rapidly accelerated towards the anode. This creates a large amount of current to flow through the diode. As the voltage decreases below the breakdown voltage again, the electric field disappears and the current reduces to almost zero. This protects the electronic circuit from the voltage transient, and clamps the peak voltage at the level of the breakdown voltage of the diode.

The PESD5V0S1BL,315 diode is an ideal choice for protecting digital systems from voltage transients, as it is capable of maintaining normal operation of the system while claming the peak voltage at a safe level in the event of a voltage spike. Its ultra-fast response time protects your circuits from any peak transient damage with ease and superior reliability. At the same time, its small size and low power consumption make it an ideal choice for a wide range of protection applications. Thanks to its low cost, the PESD5V0S1BL,315 diode is now widely used in a variety of consumer and industrial applications for the protection of sensitive electronic systems.

The specific data is subject to PDF, and the above content is for reference