PGFP-M11

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ground Fault Circuit Interrupters (GFCI) are a type of protection device that provide a measure of safety to electrical systems by identifying and interrupting dangerous faults on conductors (e.g. exposed conductors) that can cause fire, electric shock, and other hazards. This article will focus on the PGFP-M11 GFCI and its application field and working principle.

The PGFP-M11 is a differential current-sensing GFCI designed to detect and open a circuit when a ground fault is detected in its load. It consists of two networks; a relay and a differential current transformer. The relay is used to open the circuit when a fault is detected and the differential current transformer measures the difference between the currents in the supply and return conductors. The PGFP-M11 works according to the following principles:

1) When the voltage between the supply and return conductors is greater than or equal to the voltage threshold setting of the GFCI, the difference in current between the supply and return conductors will be sensed by the differential current transformer.

2) If the difference in current exceeds a predetermined value, the relay will open the circuit to interrupt the fault.

3) When the disconnection of the fault has been verified, the GFCI will reset itself after a pre-settime interval.

4) If a fault persists, the GFCI will not reset itself and the circuit must be manually reinitiated.

The PGFP-M11 GFCI is primarily used in industrial and commercial environments with loads up to 1 kVa. It is typically used to protect equipment from ground faults, preventing shock or fire hazards that can result from such faults. The PGFP-M11 is also often used to protect building wiring from overloads or short circuits, in addition to its general use as a ground fault circuit interrupter.

The PGFP-M11 GFCI is designed to operate at either 19.2 or 20.5 mA (at a secondary voltage of 110V) and is available with nominal voltage ratings of 120/240V and 277V for single-phase applications or 480V for three-phase applications. The operating time of the PGFP-M11 is adjustable from four to 32 seconds and it has a wide operating temperature range of between -25°C and 60°C. Furthermore, this GFCI is rated to IP20.

The PGFP-M11 is a cost-effective solution for the protection of electrical systems against ground faults caused by domestic, commercial and industrial loads. It can be easily installed in existing wiring systems and provides a reliable protection from shocks and fires due to detected ground faults. It is important to ensure that the PGFP-M11 is installed in an appropriate manner and that it is periodically inspected and tested for proper operation to maintain high levels of safety.

The specific data is subject to PDF, and the above content is for reference