Allicdata Part #: | PH600S280-48-ND |
Manufacturer Part#: |
PH600S280-48 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | TDK-Lambda Americas Inc. |
Short Description: | DC DC CONVERTER 48V 600W |
More Detail: | Isolated Module DC DC Converter 1 Output 48V 12... |
DataSheet: | PH600S280-48 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 12.5A |
Control Features: | Enable, Active Low |
Size / Dimension: | 3.85" L x 1.61" W x 0.50" H (86.0mm x 41.0mm x 12.7mm) |
Package / Case: | Module |
Mounting Type: | Through Hole |
Efficiency: | -- |
Operating Temperature: | -20°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 600W |
Series: | PH-S |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 48V |
Voltage - Input (Max): | 400V |
Voltage - Input (Min): | 200V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Obsolete |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
A DC-DC converter is a type of electronic component that converts direct current (DC) from one voltage level to another. It can be used to increase or decrease the amount of current or voltage in an electrical circuit. The DC-DC converters are widely used in automotive, communication, computer, industrial, medical, renewable energy systems, and other power electronics applications.
PH600S280-48 application field and working principle
The PH600S280-48 is a high-performance DC-DC converter that can convert a wide input voltage range to a wide range of output voltages. It is suitable for industrial, automotive, renewable energy, and other high power applications. This device utilizes a highly efficient full-bridge PWM regulator with a current-fed half bridge differential power amplifier. It has an adjustable voltage structure, wide input voltage range, temperature range of -40 to +85℃, and high efficiency with low EMI and ripple noise.
The PH600S280-48 converter can work in either step-down or step-up mode. In step-down mode, the converter steps down the input voltage and provides a stable output. In step-up mode, the converter steps up the input voltage and gives a higher output voltage. This makes it useful for applications where the available voltage needs to be increased to a higher level. The processor includes several protections such as over-current, over temperature, short-circuit, and input reverse polarity protection.
The converter also has an adjustable switching frequency of up to 10KHz and can be used in applications requiring high efficiency. This device has an adjustable output current of up to 60A. The output voltage and output current can be set up through an external resistor or an external 8-pin dip switch. The device also has an enable time control feature that allows it to delay the start-up time of the output after a power-on condition.
The PH600S280-48 has a low quiescent current of only 2mA, which is necessary to minimize power loss. In addition, it has an integrated soft-start function that gradually increases the output voltage at power up. The integrated MOSFETs and peak current defense circuitry of the device provide excellent protection from over current, short-circuit, and transient overloads.
Overall, the PH600S280-48 is a highly efficient and reliable DC-DC converter. It is designed to meet the needs of a variety of demanding applications. It has excellent EMI, ripple noise, and output voltage ripple characteristics, and a wide temperature range. The adjustable current, voltage, frequency and input voltage range make it suitable for a variety of design requirements.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PH6030L,115 | NXP USA Inc | 0.0 $ | 1000 | MOSFET N-CH 30V 76.7A LFP... |
PH6030AL,115 | Nexperia USA... | 0.0 $ | 1000 | MOSFET N-CH 30V 79A LFPAK... |
PH600S280-12 | TDK-Lambda A... | 0.0 $ | 1000 | DC DC CONVERTER 12V 600WI... |
PH600S280-15 | TDK-Lambda A... | 0.0 $ | 1000 | DC DC CONVERTER 15V 600WI... |
PH600S280-24 | TDK-Lambda A... | 0.0 $ | 1000 | DC DC CONVERTER 24V 600WI... |
PH600S280-28 | TDK-Lambda A... | -- | 1000 | DC DC CONVERTER 28V 600WI... |
PH600S280-3.3 | TDK-Lambda A... | 0.0 $ | 1000 | DC DC CONVERTER 3.3V 600W... |
PH600S280-48 | TDK-Lambda A... | 0.0 $ | 1000 | DC DC CONVERTER 48V 600WI... |
PH600S280-5 | TDK-Lambda A... | 0.0 $ | 1000 | DC DC CONVERTER 5V 600WIs... |
PH60 | 20.79 $ | 75 | IRON STAND FOR WP SERIES |
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...