Allicdata Part #: | 1102-5538-ND |
Manufacturer Part#: |
PI3525-00-EVAL1 |
Price: | $ 148.74 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Vicor Corporation |
Short Description: | EVALUATION BOARD FOR PI3525-00-L |
More Detail: | PI3525-00 Cool-Power® DC/DC, Step Down Outputs Ev... |
DataSheet: | PI3525-00-EVAL1 Datasheet/PDF |
Quantity: | 8 |
1 +: | $ 133.86200 |
Series: | Cool-Power® |
Part Status: | Active |
Main Purpose: | DC/DC, Step Down |
Outputs and Type: | -- |
Voltage - Output: | 5V |
Current - Output: | 20A |
Voltage - Input: | 60V |
Regulator Topology: | Buck |
Frequency - Switching: | -- |
Board Type: | Fully Populated |
Supplied Contents: | Board(s) |
Utilized IC / Part: | PI3525-00 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The PI3525-00-EVAL1 Evaluation Board is one of the most versatile and comprehensive evaluation devices available today. This evaluation board is designed to assist designers in evaluating and testing DC/DC and AC/DC (off-line) SMPS designs.
This evaluation board offers a wide range of features, such as a 5V/1A/400kHz switching power supply, various on-board I/O ports, pre-built MOSFET control logic circuits, adjustable bias controllers, adjustable reference voltage, adjustable reg/key current pulse, adjustable cycling signal generator circuit, adjustable gate drive timing signals, adjustable synchronous operation and adjustable voltage positions. Additionally, the PI3525-00-EVAL1 Evaluation Board has three operating states, including manual, remote and automatic.
The PI3525-00-EVAL1 Evaluation Board also includes a ZLP3525 on-board DC/DC converter, a half-bridge MOSFET driver, various other components such as a logic analyzer, a DC output voltage probe, a resistor divider, a low-ESR ceramic capacitor, a stabilization inductor, a choke inductor, a snubber capacitor, a protection resistor and a ground resistor.
The PI3525-00-EVAL1 Evaluation Board has an easy-to-understand and easy-to-use graphical user interface (GUI). This graphical user interface allows the user to set operating parameters such as output voltage, output current, operating frequency, voltage control gain and temperature settings. Additionally, the graphical user interface can be used to access additional features and settings such as voltage control paramenter, test initiate/stop signals, operating modes, over-voltage and under-voltage protection and warning signals.
The PI3525-00-EVAL1 Evaluation Board is designed to evaluate the PI3525-00 off-line SMPS chip. This chip is a switched mode power supply which can be used in various DC/DC and AC/DC applications. The PI3525-00 chip provides a range of output response times ranging from nanoseconds to milliseconds and adjustable switching frequency from 50kHz to 200kHz. This chip also provides adjustable soft start, high voltage (HV) spike protection, low-ESR ceramic capacitors for high-frequency filtering and enhanced EMI reduction.
The operating principle of the PI3525-00-EVAL1 Evaluation PCB is based on the basics of switched mode power supply. The PI3525-00 chip uses a dedicated pulse-width modulation signal that is pulse-width modulated (PWM) to provide the necessary voltage and current required by the load. The PWM signal is generated by the PI3525-00-EVAL1 Evaluation Board and is typically adjustable in the range of 20kHz to 400kHz.
The PI3525-00-EVAL1 Evaluation Board can be used to evaluate the PI3525-00 off-line SMPS chip in various applications, including commercial, lighting, industrial, automotive and medical applications. The board can also be used to evaluate the PI3525-00 off-line SMPS chip in multiple applications such as AC-DC converters, DC-DC converters, regulated power supplies, constant voltage and current regulators, battery chargers, motor control systems and audio amplifiers.
With its versatile feature set, advanced graphical user interface and extensive application field, the PI3525-00-EVAL1 Evaluation Board is an invaluable asset for designers who want to evaluate the PI3525-00 off-line SMPS chip and develop their designs in the quickest and most efficient way possible.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PI3523-00-LGIZ | Vicor Corpor... | 13.94 $ | 91 | DC DC CONVERTER 3.3VNon-I... |
PI3546-00-LGIZ | Vicor Corpor... | 9.88 $ | 438 | DC DC CONVERTER 12VNon-Is... |
PI3525-00-LGIZ | Vicor Corpor... | 12.55 $ | 15 | DC DC CONVERTER 5V 100WNo... |
PI3526-00-LGIZ | Vicor Corpor... | 12.55 $ | 178 | 60VIN TO 12VOUT/18A COOL-... |
PI3545-00-LGIZ | Vicor Corpor... | 9.88 $ | 48 | DC DC CONVERTER 5VNon-Iso... |
PI3542-00-LGIZ | Vicor Corpor... | 9.73 $ | 1000 | DC DC CONVERTER 2.5VNon-I... |
PI3543-00-LGIZ | Vicor Corpor... | 9.73 $ | 1000 | DC DC CONVERTER 3.3VNon-I... |
PI3546-00-EVAL1 | Vicor Corpor... | 26.87 $ | 17 | EVAL BOARD FOR PI3546-00-... |
PI3545-00-EVAL1 | Vicor Corpor... | 26.87 $ | 10 | EVAL BOARD FOR PI3545-00-... |
PI3543-00-EVAL1 | Vicor Corpor... | 26.87 $ | 16 | EVAL BOARD FOR PI3543-00-... |
PI3525-00-EVAL1 | Vicor Corpor... | 148.74 $ | 8 | EVALUATION BOARD FOR PI35... |
PI3526-00-EVAL1 | Vicor Corpor... | 154.36 $ | 20 | EVAL BOARD FOR PI3526-00-... |
PI3542-00-EVAL1 | Vicor Corpor... | 26.87 $ | 5 | EVAL BOARD FOR PI3542-00-... |
PI3523-00-EVAL1 | Vicor Corpor... | 143.26 $ | 4 | EVALUATION BOARD FOR PI35... |
EVAL KIT FOR ACT4060ASH-TACT4060A - DC/D...
BOARD EVAL OFFLINE CTLR NCP1337ANCP1337 ...
BOARD EVAL POE FOR SI3402Si3402 - Specia...
EVAL BOARD FOR DCM24AP150T320A50DCM24AP1...
BOARD EVALUATION LM3670MF-1.5LM3670 - DC...
EVAL BOARD QUASI RES 15WVIPER35HD - AC/D...