PI3CH1010LEX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PI3CH1010LEX device is a logic - signal switches, multiplexers, decoders. It is designed to provide a configurable switch made up of chainable ICs used to connect two data ports with two enable signals. This device is capable of handling several signals as input, enabling multiplexing, decoding, switching and routing. It can operate in any of the following modes: manual input-to-output switching, “smart” (programmable) input-to-output switching, and manual input-to-input/output-to-output data routing.

The PI3CH1010LEX operates in standard logic-signal voltage levels from 5V to 3.3V and is single ended. It includes four multiplexers with 32-bit data width that can be cascaded for higher data widths and 2-to-128 bit data routing capabilities. The device features adjustable drive strength on all its output ports. Both the multiplexers and the programmable switch can be configured using SPI bus. The SPI bus also allows read and write access to the 4-port FIFO registers.

The PI3CH1010LEX has an internal control logic block that provides the necessary logic functions for multiplexing, decoding and routing. It also includes an internal bandgap regulator for temperature compensated operations. The PI3CH1010LEX is capable of handling a wide range of signal level swing and run at very low power consumption.

The PI3CH1010LEX is well suited for applications like high speed data switching, large-scale data routing, digital signal routing and conditioning, protocol translation, and communication link management. It can support a wide range of protocols such as PCI Express, USB, HDMI, Display Port, I2C and UART. In addition, this device has the ability to improve system performance by routing data more efficiently and improving data integrity. It also helps with system cost reduction since it eliminates the need for additional components.

The working principle of the PI3CH1010LEX is relatively simple. The chip contains an internal control logic block and a multiplexing/decoding circuit. The control logic block provides the necessary logic functions for multiplexing, decoding, and routing the input signals. The multiplexing/decoding circuit is responsible for connecting two data ports with two enable signals. The circuit is also capable of providing adjustable drive strength for each of the output ports.

The PI3CH1010LEX also includes an internal programmable switch that allows for read and write access to the FIFO registers as well as a bandgap regulator for temperature compensated operations. The internal control logic block drives the multiplexer/decoders, which can be programmed to route signals from one port to another and from one port to multiple ports. With the aid of the programmable switch, the device can be configured to perform operations like signal level conversion, data multiplexing, data routing, and data switching.

Overall, the PI3CH1010LEX is an advanced logic - signal switches, multiplexers, decoders device with highly efficient performance, making it suitable for various applications in the field of signal and data transmission. It is capable of handling a wide variety of input signals, is low on power consumption, and offers adjustable drive strength on output ports.

The specific data is subject to PDF, and the above content is for reference