PI3EQX10908ZFE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Signal Buffers, Repeaters, Splitters.

PI3EQX10908ZFE is an integrated CMOS level shifter designed to extend or buffer the different 24-bit bus including PC/104+ bus, USB3 signals from a single supply range of 1.8 V to 5.5 V, without the need for any external components. The input ports accept single ended signals on 3.3 V and 5 V nodes, and with the integrated level shifter it can shift differential data between two nodes with a voltage offset of up to 900mV for fast and reliable performance. This part can be used in applications where the required magnitude of level shifting is not sufficient and where the cost of extra components is prohibitive.

The main application field of PI3EQX10908ZFE is in motorized lighting, embedded systems, robotics and automation. It also can be used in reducing the complexity and overall size of applications leveraging its wide variety of input and output port configurations. Its flexible data rate and interface configurations make it an attractive choice for various embedded control systems. It supports 24-bit (8-bit + 8-bit + 8-bit) data width, as well as delivers data at transfer rate of up to 6Mbps, which makes it suitable for applications like bus expansion, remote configuration over wide area networks, point-to-point communications, consumer electronics and data acquisition.

The working principle of PI3EQX10908ZFE is based on the RS-485 transceiver principle. In this principle, data is transferred in differential mode, which means that the logic “1” is transmitted by driving the signal voltage on one side of the data line, while the signal voltage on the other side of the data line is driven low. This is done to eliminate the sensitivity to noise, which is one of the main concerns of most of the signal transmission lines. Because of this principle, the signal transmission line can be implemented in any differential topology, such as RS-485, RS-422, or USB3.

It is also important to note that, the PI3EQX10908ZFE chip supports up to 40MHz transmission, which is, on the other hand, much faster than some of the traditional serial communication protocols. This is particularly important for applications that require real-time data exchange and processing. Additionally, the chip can be used in applications that require precise timing information, as it can support both point-to-point and broadcast communication for up to 16 different devices simultaneously.

To sum up, PI3EQX10908ZFE is an integrated CMOS level shifter designed to provide reliable and precise performance in applications like motorized lighting, embedded systems, robotics and automation. It supports 24-bit (8-bit + 8-bit + 8-bit) data width, as well as delivers data at transfer rate of up to 6Mbps, which makes it suitable for applications like bus expansion, remote configuration over wide area networks, point-to-point communications and consumer electronics. Its capability to support up to 40MHz transmission, which is, on the other hand, much faster than some of the traditional serial communication protocols, makes it a viable and attractive choice for various embedded control systems.

The specific data is subject to PDF, and the above content is for reference