PI3USB102EZLEX Integrated Circuits (ICs)

The PI3USB102EZLEX is a special purpose analog switch from Texas Instruments. It is designed to provide a low-power, low-voltage, low-cost single port USB2.0 peripheral interface for applications such as battery-powered USB-enabled devices, and embedded systems. In addition to the single port interface, this device offers a low power consumption and an I/O pin-compatible programming. It can be used in many applications that require an analog switch.

The PI3USB102EZLEX provides a 4-bit programmable output port, with a single bit dedicated to enabling or disabling the device. It features three power modes: inactive, active, and standby. This allows it to be put into a low-power mode when not in use and draw minimal power, while still providing a reliable interface.

The PI3USB102EZLEX has eight I/O pins and uses pass-through port to route signal from the host controller to the external port on the device. The device can switch between external and internal ports with a single control input. The device can also be used to isolate signal from the host controller, with the external ports connected to ground. The PI3USB102EZLEX features an adjustable threshold voltage and can be configured to provide a signal up to the external load. This helps save power and extends battery life.

The PI3USB102EZLEX provides a wide range of features, including a low voltage threshold and wide voltage range. It is also compliant with the USB2.0 specification, supporting data rates up to 480 Mbps. The device operates over a temperature range of -40 to +85 degrees Celsius and has an operating life of up to 10 years. It is RoHS compliant and is made with lead-free components.

In terms of applications, the PI3USB102EZLEX can be used in embedded systems, consumer electronics, healthcare products, consumer audio devices and USB-enabled devices. It can also be used for peripheral communication interface, such as serial port and programmable logic controllers. Additionally, this device can be used to bridge between existing digital signals and USB protocol.

Overall, the PI3USB102EZLEX is a low-power, low-voltage, low-cost, single-port USB2.0 peripheral interface designed for a wide range of applications. It is easy to program and comes with an adjustable threshold voltage and wide voltage range. This device can also be used to isolate signal from a host controller, provide a signal up to the external load, and bridge between existing digital signals and USB protocol. The PI3USB102EZLEX is compliant with the USB2.0 specification, operating over temperature range of -40 to +85 degrees Celsius, with an operating life of up to 10 years.