PI3USB20LEX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PI3USB20LEX is a single channel low-voltage FET bus switch that provides a low-power, low-voltage interface between a USB and an I2C-bus. This switch provides logic-level isolation between the two buses and is suitable for use in applications where USB and I2C must share a common port. The switch features a low on-state resistance of 4Ω (typical) and a low off-state leakage current of 1nA (typical) at +5V. The PI3USB20LEX has an operating temperature range of -20°C to +85°C, and can be used in a variety of USB and I2C applications.

The PI3USB20LEX is a two-wire interface between USB and I2C buses. It is designed to provide a discrete, low-power, dual-mode interface between USB and I2C buses. This switch is used in applications where multiple digital devices, including sensors, need to be operated with a single controller, such as a microcontroller. In this configuration, the PI3USB20LEX acts as a bridge between the USB and I2C buses. It is suitable for use in low-power, low-voltage applications, as well as applications where high speed digital communication is needed.

The PI3USB20LEX is an analog switch with a wide range of functions. Its main application is providing a low-power, low-voltage interface to the USB and I2C buses. It can be used for both bidirectional and unidirectional switching capabilities. The switch features a low on-state resistance of 4Ω (typical) and a low off-state leakage current of 1nA (typical) at +5V. In addition, it can be configured to provide a logical level isolation between the two buses, allowing for the isolation of hot-swap levels and power-on reset lines. The switch can also be used for signal merging, and offers an open-drain drive capability.

The PI3USB20LEX is a single-channel switch that is operated through a single digital control line. This line is used to enable or disable the switch, as well as to configure its operating modes. By default, the switch is configured to provide a low-voltage bidirectional connection between the USB and I2C buses. It can also be controlled manually, or by a microcontroller. The PI3USB20LEX is designed to provide a low-power, low-voltage interface between the USB and I2C buses, with a minimum on-state resistance of 4Ω (typical) and a maximum off-state leakage current of 1nA (typical).

The PI3USB20LEX is an analog switch with a wide range of applications in interface and specialty-purpose analog electronics. It is ideal for applications where multiple digital devices, such as sensors, need to be operated with a single controller. The switch is suitable for use in low-power, low-voltage applications, as well as in applications where high speed digital communication is required. In addition, its low on-state resistance and low leakage current make it ideal for applications where both low-power and low-voltage are important.

In conclusion, the PI3USB20LEX is a low-power, low-voltage analog switch used to provide interface and special-purpose capability between USB and I2C buses. It is designed to provide a discrete, low-power, dual-mode interface between USB and I2C buses, and is suitable for use in a variety of USB and I2C applications. The switch features a low on-state resistance of 4Ω (typical) and a low off-state leakage current of 1nA (typical) at +5V, making it ideal for low-power, low-voltage applications. The switch also provides logic-level isolation between the two buses, allowing for the isolation of hot-swap levels and power-on reset lines. The PI3USB20LEX is ideal for applications that require both low-power consumption and low-voltage operation.

The specific data is subject to PDF, and the above content is for reference