PIC12F675-I/P

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. High-performance RISC CPU:

    1. Only 35 learning instructions

        - All single cycle instructions except for branches

    2. Operating speed:

        - DC-20 MHz oscillator/clock input

        - DC-200 ns instruction cycle

    3. Interrupt capability

    4. 8-level deep hardware stack

    5. Direct, indirect and relative addressing modes

2. Special microcontroller features:

    1. Internal and external oscillator options

        - Precision internal 4 MHz oscillator factory Calibrated to ±1%

        - External oscillator supports crystal and Resonator

        - 5 µs wake up from sleep state, 3.0V, typical

    2. Energy-saving sleep mode

    3. Wide operating voltage range-2.0V to 5.5V

    4. Industrial and extended temperature range

    5. Low-power power-on reset (POR)

    6. Power-on timer (PWRT) and oscillator start Timer (OST)

    7. Power-down detection (BOD)

    8. Watchdog timer (WDT) with independent function Reliable operation of oscillator

    9. Multiplexed MCLR/input pin

  10. Pin interrupt change

  11. Single programmable weak pull-up

  12. Programmable code protection

  13. High endurance flash/EEPROM unit

        - 100,000 write flash memory endurance

        - Endurance of 1,000,000 writes to EEPROM

        - Flash memory/data EEPROM retention time:> 40 years

3. Low power consumption characteristics:

    1. stand-by current:

        - 1 nA @ 2.0V, typical

    2. Working current:

        - 8.5 µA @ 32 kHz, 2.0V, typical

        - 100 µA @ 1 MHz, 2.0V, typical

    3. Watchdog timer current

        - 300 nA @ 2.0V, typical

    4. Timer1 oscillator current:

        - 4 µA @ 32 kHz, 2.0V, typical

4. Peripheral functions:

    1. 6 I/O pins with independent direction control

    2. High current sink/source for direct LED drive

    3. The analog comparator module has:

        - An analog comparator

        - Programmable on-chip comparator reference voltage (CVREF) module

        - Programmable input multiplexing from device input

        - Comparator output can be accessed externally

    4. Analog-to-digital converter module (PIC12F675):

        - 10-bit resolution

        - Programmable 4 channel input

        - Voltage reference input

    5. Timer0: 8-bit timer/counter with 8-bit programmable prescaler

    6. Enhanced timer 1:

        - 16-bit timer/counter with prescaler

        - External department input mode

        - If INTOSC mode is selected, OSC1 and OSC2 can be used as Timer1 oscillator in LP mode

    7. In-Circuit Serial ProgrammingTM (ICSPTM) via two pins

5. Pin configuration

6. Package overview