PIC16F630-I/SL

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Special Microcontroller Features

    1. Internal and External Oscillator Options

        - Precision Internal 4 MHz oscillator factory calibrated to ±1%

        - External Oscillator support for crystals and resonators

        - 5 μs wake-up from Sleep, 3.0V, typical

    2. Power-Saving Sleep mode

    3. Wide Operating Voltage Range – 2.0V to 5.5V

    4. Industrial and Extended Temperature Range

    5. Low-Power Power-on Reset (POR)

    6. Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

    7. Brown-out Detect (BOD)

    8. Watchdog Timer (WDT) with Independent Oscillator for Reliable Operation

    9. Multiplexed MCLR/Input-pin

  10. Interrupt-on-Pin Change

  11. Individual Programmable Weak Pull-ups

  12. Programmable Code Protection

  13. High Endurance Flash/EEPROM Cell

        - 100,000 write Flash endurance

        - 1,000,000 write EEPROM endurance

        - Flash/data EEPROM retention: > 40 years

2. Peripheral Features

    1. 12 I/O Pins with Individual Direction Control

    2. High Current Sink/Source for Direct LED Drive

    3. Analog Comparator module with:

        - One analog comparator

        - Programmable on-chip comparator voltage reference (CVREF) module

        - Programmable input multiplexing from device inputs

        - Comparator output is externally accessible

    4. Analog-to-Digital Converter module (PIC16F676):

        - 10-bit resolution

        - Programmable 8-channel input

        - Voltage reference input

    5. Timer0: 8-bit Timer/Counter with 8-bit Programmable Prescaler

    6. Enhanced Timer1:

        - 16-bit timer/counter with prescaler

        - External Gate Input mode

        - Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected

    7. In-Circuit Serial ProgrammingTM (ICSPTM) via two pins

3. High-Performance RISC CPU

    1. Only 35 Instructions to Learn

        - All single-cycle instructions except branches

    2. Operating Speed:

        - DC – 20 MHz oscillator/clock input

        - DC – 200 ns instruction cycle

    3. Interrupt Capability

    4. 8-level Deep Hardware Stack

    5. Direct, Indirect, and Relative Addressing modes

4. Low-Power Features

    1. Standby Current:

        - 1 nA @ 2.0V, typical

    2. Operating Current:

        - 8.5 µA @ 32 kHz, 2.0V, typical

        - 100 μA @ 1 MHz, 2.0V, typical

    3. Watchdog Timer Current

        - 300 nA @ 2.0V, typical

    4. Timer1 Oscillator Current:

        - 4 μA @ 32 kHz, 2.0V, typical