PIC16F723A-I/SO

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. High-Performance RISC CPU:

    1. Only 35 Instructions to Learn:

        - All single-cycle instructions except branches

    2. Operating Speed:

        - DC – 20 MHz oscillator/clock input

        - DC – 200 ns instruction cycle

    3. Up to 4K x 14 Words of Flash Program Memory

    4. Up to 192 Bytes of Data Memory (RAM)

    5. Interrupt Capability

    6. 8-Level Deep Hardware Stack

    7. Direct, Indirect and Relative Addressing modes

    8. Processor Read Access to Program Memory

    9. Pinout Compatible to other 28-pin PIC16CXXX and PIC16FXXX Microcontrollers

2. Special Microcontroller Features:

    1. Precision Internal Oscillator:

        - 16 MHz or 500 kHz operation

        - Factory-calibrated to ±1%, typical

        - Software tunable

        - Software selectable ÷1, ÷2, ÷4 or ÷8 divider

    2. 1.8V-5.5V Operation – PIC16F722A/723A

    3. 1.8V-3.6V Operation – PIC16LF722A/723A

    4. Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

    5. Brown-out Reset (BOR):

        - Selectable between two trip points

        - Disable in Sleep option

    6. Programmable Code Protection

    7. In-Circuit Serial ProgrammingTM (ICSPTM) via Two Pins

    8. Multiplexed Master Clear with Pull-up/Input Pin

    9. Industrial and Extended Temperature Range

  10. Power-Saving Sleep mode

3. Extreme Low-Power Management

    1. PIC16LF722A/723A with XLP:

        - Sleep Mode: 20 nA

        - Watchdog Timer: 500 nA

        - Timer1 Oscillator: 600 nA @ 32 kHz

4. Analog Features:

    1. A/D Converter:

        - 8-bit resolution, 11 channels

        - Conversion available during Sleep

        - Selectable 1.024/2.048/4.096V voltage reference

    2. On-chip 3.2V Regulator (PIC16F722A/723A devices only)

5. Peripheral Highlights:

    1. 25 I/O Pins (1 Input-only Pin):

        - High-current source/sink for direct LED drive

        - Interrupt-on-pin change

        - Individually programmable weak pull ups

    2. Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler

    3. Enhanced Timer1:

        - Dedicated low-power 32 kHz oscillator

        - 16-bit timer/counter with prescaler

        - External Gate Input mode with toggle and single shot modes

        - Interrupt-on-gate completion

    4. Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler

    5. Two Capture, Compare, PWM (CCP) modules:

        - 16-bit Capture, max. resolution 12.5 ns

        - 16-bit Compare, max. resolution 200 ns 

        - 10-bit PWM, max. frequency 20 kHz

    6. Addressable Universal Synchronous Asynchronous Receiver Transmitter (AUSART)

    7. Synchronous Serial Port (SSP):

        - SPI (Master/Slave)

        - I2C (Slave) with Address Mask

    8. mTouch® Sensing Oscillator module:

        - Up to eight input channels

6. Package overview