PIC16LCE625-04E/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PIC16LCE625-04E/P microcontroller is a component primarily used for embedded computing applications in industrial, consumer and automotive electronics. It is an 8-bit microcontroller designed for operation at a voltage between 1.8V to 5.5V. It is ideal for applications where size, low power consumption and cost are key factors. The microcontroller has an 24-bit instruction width and can execute up to 75 instructions in a single cycle. It has an integrated EEPROM, which can store up to 512 bytes of data.

The PIC16LCE625-04E/P is a member of the PIC16 family, which is a family of 8-bit microcontrollers optimized for cost and power. It features a wide range of features and peripherals, including 5-bit programmable I/O pins, an analog comparator module, comparator multiplexers, ADCs, and DACs. The microcontroller has up to 128 bytes of RAM and 4Kbytes of program memory and up to 4Kbytes of data memory. It can support up to 10-bit analog-to-digital conversion, with a maximum resolution per channel of 8-bit.

The PIC16LCE625-04E/P microcontroller offers multiple power saving modes and up to 14 Timers,5 PWMs and one e-compass with temperature sensor with 4 modes of operation. It can support up to three I2C bus modules that can run simultaneously in slave-master or slave-slave mode. Furthermore, the microcontroller offers error correction code (ECC) support, allowing the microcontroller to detect and correct errors due to soft programming and application noise. The on-chip reset generator can provide a system reset in the event of a power failure or fault.

The PIC16LCE625-04E/P also offers an integrated security module and an embedded bootloader, which can be used for authentication and secure code authentication for application software updates. The microcontroller is also designed to be easy to use and has three programming languages available, including Assembly, Basic and C.

The PIC16LCE625-04E/P microcontroller is specifically designed for applications where size and power are critical factors, including embedded systems and portable electronics. It is ideal for applications where cost, speed, and power optimization is important. The microcontroller is used in a range of industrial, consumer and automotive applications, including HVAC systems, security systems, vehicle networks, factory automation and sensing systems.

The working principle of the PIC16LCE625-04E/P microcontroller is based on the two primary components—the core and the peripheral circuitry. The core of the microcontroller is an 8-bit Harvard-architecture processor with an instruction set optimized for efficient control applications. This processor has an instruction set that supports up to 75 instructions with 24-bit wide encoded instructions. The peripheral circuitry includes EEPROM memory, analog-to-digital conversion, digital-to-analog conversion, TWI, UART, and PWM modules, among other components.

The core of the PIC16LCE625-04E/P microcontroller is responsible for executing the user-defined instructions, which are stored in the program memory. The peripheral circuitry is responsible for handling all the input/output operations and system communications, as well as processing any analog signals. When an instruction is executed, the program counter is incremented, the memory address is moved to the next instruction, and the peripheral circuitry then carries out the operations stipulated by the instruction. In this way the microcontroller is able to repeatedly execute instructions and carry out complex operations.

In summary, the PIC16LCE625-04E/P is an 8-bit microcontroller designed for embedded computing applications in industrial, consumer, and automotive electronics and is optimized for cost and power. The microcontroller has an instruction width of 24-bits and can execute up to 75 instructions in a single cycle. It has up to 128 bytes of RAM and 4Kbytes of program and data memory and supports up to 10-bit analog-to-digital conversion with a maximum resolution per channel of 8-bit. It also offers an integrated security module and embedding bootloader, error correction code support, and a wide range of peripherals. Its working principle is based on a Harvard-architecture processor with an optimized instruction set, and peripheral circuitry that includes EEPROM memory, analog-to-digital conversion, digital-to-analog conversion, and more. The microcontroller is ideal for embedded systems and portable electronics.

The specific data is subject to PDF, and the above content is for reference