PIC24EP512GP806-I/PT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PIC24EP512GP806-I/PT is an important type of microcontroller technology in the embedded field. It is an integrated circuit that is used to control and manage the operation of certain electronic and electrical systems. As its name implies, the microcontroller consists of a processor as well as programmable memory and input/output capabilities all on a single chip.This particular microcontroller is designed for use in automotive, communications, consumer electronics, industrial automation and computer networking applications. 

The PIC24EP512GP806-I/PT uses a 16-bit processor, which is able to process data quickly, allowing it to handle tasks requiring high performance. It also offers 8KB of user-programmable nonvolatile flash memory, 12KB of RAM and a variety of peripherals, including a 10-bit A/D, 2 USARTs, 4 I2C modules, 3 Enhanced Capture/Compare/PWM modules, 4 Timer modules, and even a Wake-up Timer.In terms of working principle, this microcontroller follows the same principles as any other programmable computer device. To begin with, the user has to input the program code, known as the firmware, into the microcontroller. This can be done in a variety of ways, such as uploading the code directly to the processor, or via an EEPROM device. Then, when power is supplied to the microcontroller, the user’s program code will be executed by the processor.

The PIC24EP512GP806-I/PT also has eight channels of 10-bit A/D conversion, allowing for a wide range of data to be read in from a variety of analog inputs.Finally, the PIC24EP512GP806-I/PT also offers a variety of timing and synchronization capabilities, allowing it to be used with a range of motor control and sensing applications. The microcontroller includes a 24MHz oscillator with three capture-compare-PWM channels, which can be used to measure the rotational speed of a motor or to control its speed. 

Operating Conditions

    1. 3.0V to 3.6V, -40ºC to +125ºC, DC to 60 MIPS

    2. 3.0V to 3.6V, -40ºC to +85ºC, DC to 70 MIPS

Core: 16-Bit dsPIC33E/PIC24E CPU

    1. Code-Efficient (C and Assembly) architecture

    2. Two 40-Bit Wide Accumulators

    3. Single-Cycle (MAC/MPY) with Dual Data Fetch

    4. Single-Cycle Mixed-Sign MUL Plus Hardware Divide

    5. 32-Bit Multiply Support

Clock Management

    1. 2% Internal Oscillator

    2. Programmable PLLs and Oscillator Clock Sources

    3. Fail-Safe Clock Monitor (FSCM)

    4. Independent Watchdog Timer

    5. Fast Wake-up and Start-up

Power Management

    1. Low-Power Management modes (Sleep, Idle, Doze)

    2. Integrated Power-on Reset and Brown-out Reset

    3. 1.0 mA/MHz Dynamic Current (typical)

    4. 60 µA IPD Current (typical)

High-Speed PWM

    1. Up to Seven PWM Pairs with Independent Timing

    2. Dead Time for Rising and Falling Edges

    3. 8.32 ns PWM Resolution

    4. PWM Support for:

        - DC/DC, AC/DC, Inverters, PFC, Lighting

        - BLDC, PMSM, ACIM, SRM

    5. Programmable Fault Inputs

    6. Flexible Trigger Configurations for ADC Conversions

Advanced Analog Features

    1. Two Independent ADC modules:

        - One ADC configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H

        - One 10-bit ADC, 1.1 Msps with four S&H

        - Eight S&H using both ADC 10-bit modules

        - 24 analog channels (64-pin devices) up to 32 analog channels (100/121/144-pin devices)

    2. Flexible and Independent ADC Trigger Sources

    3. Comparators:

        - Up to three Analog Comparator modules

        - Programmable references with 32 voltage points

Timers/Output Compare/Input Capture

    1. 27 General Purpose Timers:

        - Nine 16-bit and up to four 32-bit Timers/Counters

        - 16 OC modules configurable as Timers/Counters

        - Two 32-bit Quadrature Encoder Interface (QEI) modules configurable as Timers/Counters

    2. 16 IC modules

    3. Peripheral Pin Select (PPS) to allow Function Remap

    4. Real-Time Clock and Calendar (RTCC) module

Communication Interfaces

    1. USB 2.0 OTG-Compliant Full-Speed Interface

    2. Four UART modules (15 Mbps)

        - Supports LIN/J2602 protocols and IrDA®

    3. Four 4-Wire SPI modules (15 Mbps)

    4. Two ECAN™ modules (1 Mbaud) CAN 2.0B Support

    5. Two I2C modules (up to 1 Mbaud) with SMBus Support

    6. Data Converter Interface (DCI) module with Support for I2S and Audio Codecs

    7. PPS to allow Function Remap

    8. Parallel Master Port (PMP)

    9. Programmable Cyclic Redundancy Check (CRC)

Direct Memory Access (DMA)

    1. 15-Channel DMA with User-Selectable Priority Arbitration

    2. UART, USB, SPI, ADC, ECAN™, IC, OC, Timers, DCI/I2S, PMP

Input/Output

    1. Sink/Source 10 mA on All Pins

    2. 5V Tolerant Pins

    3. Selectable Open-Drain, Pull-ups and Pull-Downs

    4. Up to 5 mA Overvoltage Clamp Current

    5. External Interrupts on All I/O pins

Qualification and Class B Support

    1. AEC-Q100 REVG (Grade 1 -40ºC to +125ºC) Planned

    2. AEC-Q100 REVG (Grade 0 -40ºC to +150ºC) Planned

    3. Class B Safety Library, IEC 60730

Debugger Development Support

    1. In-Circuit and In-Application Programming

    2. Five Program and Three Complex Data Breakpoints

    3. IEEE 1149.2 Compatible (JTAG) Boundary Scan

    4. Trace and Run-Time Watch

In addition, the PIC24EP512GP806-I/PT also has four timer modules, which can be used to keep track of time or to count events.In conclusion, the PIC24EP512GP806-I/PT is an extremely versatile microcontroller that can be used for a variety of applications in the embedded field. With its powerful 16-bit processor, ample flash memory, and wide range of peripherals and timing capabilities, it is well-suited for use in automotive, communications, consumer electronics, industrial automation, and computer networking.

The specific data is subject to PDF, and the above content is for reference