PIC24F08KM204-I/MV

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Embedded systems are used in computers, consumer electronics, and communication devices to automate tasks and improve the user experience. The design of embedded systems involves selecting a microcontroller, combining it with various peripheral components, and programming the microcontroller for the desired behavior. The PIC24F08KM204-I/MV is a high-performance 8-bit microcontroller with integrated features that make it ideal for a wide variety of embedded applications.

The PIC24F08KM204-I/MV is an 8-bit MCU based on the PIC24F architecture and manufactured using Microchip\'s high-density CMOS process. This microcontroller contains up to 4K words of on-chip Flash Program Memory. It also has 8K words of on-chip SRAM and up to 8K words of on-chip EEPROM. It offers a wide range of peripherals, including a 16-bit timer, a 2-channel 10-bit ADC, a comparator, SPI and I2C buses, and up to 26 I/O pins. The PIC24F08KM204-I/MV is available in 44-pin PDIP, 52-pin TQFP, and 52-pin VFQFPN packages.

The PIC24F08KM204-I/MV is designed for low-power applications. It operates from a 3V to 3.6V power supply and can be powered down to a standby current of 15µA in the Sleep mode. The MCU also features a wide range of peripheral features, including an 8-bit timer/counter module, three UART modules, two ECCP modules, and one I2C module. The ECCP modules provide enhanced capture/compare/pulse-width modulation (ECCP) capabilities, allowing the microcontroller to control power motors, LEDs, and other types of actuators. Furthermore, the microcontroller also includes up to 40 general-purpose registers, one stack, and four interrupt sources.

The PIC24F08KM204-I/MV can be used in applications such as consumer electronics, automotive, and industrial, as well as in a wide range of applications requiring low-power, low-cost and high-performance controllers. It can be used in portable devices such as PDAs, mobile phones and digital cameras, as well as in fixed-function devices such as modems, microwaves, and security systems. It can also be used in industrial applications such as motor control, automatic test equipment and medical instrument control.

The PIC24F08KM204-I/MV microcontroller is based on a Harvard architecture that provides separate instruction and data memories. The Program Memory is organized as 4K words of on-chip Flash Program Memory. Program execution is non-intrusive; Memory write and erase is achieved using a single Flash or EEPROM write/erase command. Flexible non-volatile memory access allows single-word write as well as program and data memory write routines.

The PIC24F08KM204-I/MV microcontroller has an integrated 8-bit timer/counter module. It features two 16-bit timers, two 8-bit timers, and a 7-stage prescaler. The timer/counter module can be used for general-purpose time management or for simple pulse-width modulation to control motor speed, LED fading, and other timing-dependent applications. Furthermore, the microcontroller also features up to eight different interrupt sources for enhanced system responsiveness.

The PIC24F08KM204-I/MV microcontroller features a comparator module with up to four analog comparators. This module can be used to monitor analog signals or to compare two analog values. It also offers programmatic control of the analog comparator, allowing it to operate either in a regular or an inverted mode. The microcontroller also includes an I2C (Inter-Integrated Circuit) module with a two-wire serial bus and two programmable address lines.

The PIC24F08KM204-I/MV microcontroller is also capable of signal edge detection. This feature has two independent logic units that allow two different signal edge detections to be simultaneously enabled. The unit is programmable so that it can detect rising edges, falling edges, or both rising and falling edges. It can also be programmed for a pulse-width detection of up to three clock cycles per edge.

In summary, the PIC24F08KM204-I/MV microcontroller is a high-performance 8-bit microcontroller with integrated features that make it suitable for a wide range of embedded applications. It has an 8-bit timer/counter module, an integrated ECCP module for motor control, an I2C module for communication, up to four analog comparators, and a signal edge detection unit. This combination makes it well suited for portable devices, fixed-function devices, industrial applications, and much more. With its low-power consumption and high-performance capabilities, the PIC24F08KM204-I/MV microcontroller offers an ideal solution for any embedded application.

The specific data is subject to PDF, and the above content is for reference