PIC32MX440F256H-80V/MR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PIC32MX440F256H-80V/MR microcontroller is a device used in embedded applications. This controller is part of a larger family of chips that all belong to the PIC32MX family by Microchip Technology. These controllers are used in many different applications and have been designed to provide high-performance, cost-efficient solutions for many embedded applications.

The PIC32MX440F256H-80V/MR is a 32-bit microcontroller designed for embedded applications. It has 256 Kbytes of Flash memory with a flexible instruction set and advanced peripheral capabilities. The controller is based on a MIPS32 M4K CPU core and offers four channels of Enhanced Pulse Width Modulation (E-PWM) for controlling motors or other high-power signal applications. It also provides two UARTs and four SPI interfaces for communication with external peripherals.

The PIC32MX440F256H-80V/MR is optimized for running applications in power-friendly, low-power modes. It has an integrated voltage supervisor and extensive power control support to help achieve the desired performance while reducing power consumption. For example, the Sleep mode will allow the CPU to continue running but at a reduced speed, while the Deep Sleep mode will completely shut down the CPU and most peripherals while they are idle.

The PIC32MX440F256H-80V/MR is a powerful controller suitable for a wide range of embedded applications. It is ideally suited for designs requiring a low-power solution, advanced motor control applications, and real-time signal processing. It is also well-suited for non-volatile storage such as EEPROM since it supports both Flash and EEPROM programming.

The PIC32MX440F256H-80V/MR is a highly integrated device with integrated peripherals such as a 10-bit Analog-to-Digital (A/D) converter, 10-bit Digital-to-Analog (D/A) converter, and four I2C modules. It also has two CAN modules, two UARTs, five SPI channels, three I2S channels, USB 2.0, and support for External Memory Interface (EMI). This makes the PIC32MX440F256H-80V/MR especially well-suited for designs that require high-speed communication with peripherals.

The PIC32MX440F256H-80V/MR is built around the MIPS32 M4K CPU core, which is a high-performance RISC architecture optimized for embedded applications. The processor is powered by a 4.5-5.5V core voltage and can operate up to 80 MHz in protected or non-protected mode. It supports up to 32-bit single-cycle instructions and operates in either 32-bit or 16-bit mode for better code efficiency. It also supports hardware packets for hardware interrupts and DSP algorithms.

In addition to the processor, the PIC32MX440F256H-80V/MR also has a wide range of integrated memory and on-chip peripherals, including 256 Kbytes of Flash ROM and up to 64 Kbytes of SRAM, up to 128 Kbits of EEPROM, 10-bit A/D converter, 4 channels of Enhanced PWM, and two UARTs. Finally, it supports a wide range of power management modes including Sleep, Deep Sleep, Critical Sleep, Stop, and WDT modes.

The PIC32MX440F256H-80V/MR is a powerful controller suitable for a wide range of embedded applications. It is particularly well suited for applications requiring low power, advanced motor control features, real-time signal processing, non-volatile memory, and high-speed communication with peripherals. It is also easily programmable and can be used with Microchip\'s MPLAB X IDE for cross-platform programming.

The specific data is subject to PDF, and the above content is for reference