PM1008-R10K-RC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The PM1008-R10K-RC is a fixed inductor, or “fixed electrical component,” which is used for a variety of applications. Fixed inductors are most commonly used in filters, such as low pass and high pass filters. They are also used to store or smooth out energy, in rectifier circuits, in oscillators, and in amplifiers. Furthermore, they are used to tune antenna circuits and to couple RF signals from various stages of a transmitter or receiver.

Application Field

The PM1008-R10K-RC fixed inductor has a wide range of applications. First, it can be used as filter components in a variety of electronic devices, such as TVs, alarm systems, and radar systems. It can also be used to store or smooth out energy, in rectifier circuits, in oscillators, and in audio amplifiers. Also, it can be used to tune antenna circuits and to couple RF signals from various stages of a transmitter or receiver.

The PM1008-R10K-RC can also be used in power converters, converters for low-voltage applications such as phones, laptop chargers, and other digital devices. It can also be used in induction heating, medical imaging systems, and radio frequency identification systems. Additionally, it can be used in motor control, to create the current waveform needed to drive an AC motor.

Working Principle

Fixed inductors are composed of a conducting coil of wire that is wrapped around a core material, such as iron or ferrite. When a current is applied, it creates a magnetic field in the coil, which in turn induces a voltage in the coil. This voltage is proportional to the rate of change of the current, which is known as inductance. The inductance of the PM1008-R10K-RC fixed inductor is 10k ohms.

The magnetic properties of the PM1008-R10K-RC are due to the configuration of its windings. The windings are configured to create a self-resonant frequency, which is the frequency at which the inductor will have maximum efficiency. The self-resonant frequency of the PM1008-R10K-RC is 100 MHz.

Fixed inductors are passive components, meaning that they can only absorb power. However, this also means that they can be used to filter out noise or unwanted frequency signals. This is done by altering the self-resonant frequency of the component to absorb signals of certain frequencies. The PM1008-R10K-RC fixed inductor is designed to filter out unwanted signals in the frequency range of 10 KHz – 100 MHz.

Conclusion

The PM1008-R10K-RC is a fixed inductor, or electrical component, which is widely used for a variety of applications. It is composed of a conducting coil of wire wrapped around a core material, and when a current is applied it creates a voltage in the coil that is proportional to the rate of change of the current. The magnetic properties of this component are due to the configuration of its windings, which creates a self-resonant frequency. This is the frequency at which the component will have maximum efficiency. The self-resonant frequency of the PM1008-R10K-RC is 100 MHz, and it is designed to filter out unwanted signals in the frequency range of 10 KHz – 100 MHz.

The specific data is subject to PDF, and the above content is for reference