PM1008-R82K-RC

DC Resistance (DCR):	1.61 Ohm
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Supplier Device Package:	1008 (2520 Metric)
Package / Case:	1008 (2520 Metric)
Mounting Type:	Surface Mount
Inductance Frequency - Test:	25MHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	350MHz
Q @ Freq:	45 @ 100MHz
Series:	PM1008
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	360mA
Tolerance:	±10%
Inductance:	820nH
Material - Core:	Ceramic
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.Fixed Inductors

The PM1008-R82K-RC is an electrical component that belongs to the fixed inductors category. As its name implies, a fixed inductor is a type of electrical component in which the amount of inductance is static or fixed and is not variable. This type of component is widely used in various applications, such as signal conditioning, pulse shaping, DC/DC converters, single-phase inverters, and other applications where inductors are used.

The PM1008-R82K-RC is a multi-layer inductor and consists of a metallic core package that is wound with a thin enameled copper wire. The wire is then covered with resin to insulate and protect the copper wire from corrosion. This component has a variety of features, such as a current withstand rating of 50mA and a maximum operating temperature of 130°C. It also has a high inductance tolerance of ±20%.

The main purpose of the PM1008-R82K-RC is to stabilize voltage and current in a circuit, and provide a certain amount of inductance. In addition, this component can also be used to reduce radio frequency interference. This is because when a voltage is applied across the component, an electromagnetic field is generated. This field will interact with the induced current and cause the current to be dissipated before it reaches the load.

Working principle

The PM1008-R82K-RC is a passive component. This means that it does not require any power to operate, and is basically a resistor with an inductive reactance. This component works by storing energy in the form of a magnetic field generated by the electrical charge in the wire. This stored energy is released gradually when the current decreases, in a process called inductance. The inductive reactance of the component opposes the flow of current in the circuit, causing a decrease in current. The inductive reactance is directly proportional to the current in the circuit until the current reaches a certain point, and then the inductive reactance starts to decrease. This decrease in the inductive reactance is what allows the current to flow through the component.

Application field

The PM1008-R82K-RC is used in a variety of applications, such as power conditioning, pulse shaping, and DC/DC converters. It is also used in single-phase inverters, switched mode power supplies, and other applications where inductors are used. In addition, the component can also be used to suppress electrical noise and Radio Frequency interference (RFI). The component is ideal for use in circuits that require a high level of stability, such as signal conditioning and power converters. It is also suitable for use in circuits that require high currents, since it can handle currents up to 50mA. The component is also suitable for high frequency applications, since it has a good frequency response and can handle up to 200kHz.

The PM1008-R82K-RC is an ideal component for use in power converters, switches mode power supplies (SMPS), and other applications that require current-limiting, noise suppression, and radio frequency interference (RFI) suppression. It is also suitable for use in applications that require a stable voltage and current, due to its high current-limiting capability. The component is also suitable for use in a variety of applications, due to its ability to handle high currents and relatively low temperatures.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description