PM1206

Series:	PM
Packaging:	Tube
Part Status:	Active
Mounting Type:	Through Hole
Circuit:	SPST-NO (1 Form A)
Output Type:	AC, Zero Cross
Voltage - Input:	1.2VDC
Voltage - Load:	0V ~ 600V
Load Current:	500mA
Termination Style:	PC Pin
Package / Case:	6-DIP (0.300", 7.62mm)
Supplier Device Package:	6-DIP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays

A PM1206 solid state relay (SSR) is a high performance device used to provide electrical isolation between an electrical load and a control system. It is also a type of optoelectronic switching device that is designed for use in a wide range of electrical control and communication applications. The PM1206 SSR is suitable for use in industrial, commercial, and consumer applications.The PM1206 SSR consists of a single shot integrated circuit, a LED light source, a light detecting element, and an optically isolated solid state switch. The LED light source is used to illuminate the light detecting element, which in turn produces a small electrical signal when illuminated. This signal is then used to operate the solid state switch to control the load.The PM1206 SSR is typically used in applications such as motor control, lighting control, power control, HVAC control, audio-visual equipment control, security systems, and data communication systems.The PM1206 SSR is designed to connect two circuits that have different voltage levels. The maximum rated working voltage of the SSR is 600 Volts and the maximum current rating is 6 Amps. The switching time of the device is typically less than 1 Millisecond and the operating temperature range is from -40°C to +85°C. The PM1206 SSR offers a number of benefits including low power consumption, fast response time, high surge current capacity, and low leakage current. The SSR is also highly reliable and offers a long life expectancy.The PM1206 SSR should be used in accordance with the manufacturer’s recommended operating conditions and circuit diagrams. It is important to note that the SSR should not be used in any applications involving hazardous substances or where there may be a risk of electrical shock. In order to operate the PM1206 SSR, power must be applied to the LED light source and the two control circuits connected. The LED light source will then illuminate the light detecting element which will in turn produce a small electrical signal. When this signal is above a certain threshold, the solid state switch will be activated and the load will be controlled. The PM1206 SSR has a wide range of applications due to its high level of reliability, fast response time, and low power consumption. It is an ideal solution for applications that require reliable control of electrical loads. In addition, the PM1206 SSR provides electrical isolated between the control circuits and the load, which helps to protect the control system from any unexpected load failure.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description